Is a 996 blueprint avaliable.
#1
Is a 996 blueprint avaliable.
Guys I was wondering if anybody has a blueprint similar to the one below that show true scale markings for a 996. I need something so I can throw together a few paint designs for my car and if I have scale markings I can send it right out to be cut and not make any sizing mistakes. .
Last edited by WearyMicrobe; 09-12-2006 at 06:44 PM. Reason: Picture did not work
Trending Topics
#10
Originally Posted by WearyMicrobe
1999 coupe
Just my $0.02.
-td
#12
Paint will be one of two things, a exterior only color change to that lambo pearl orange, leaving a gulf stripe in the middle with my current color of ocean blue. The other is a very strange gothic pattern accross the whole car in a off shade of white, this would be very difficult to do without the vinyl cutter but very easy to do if I have correct specs.
#14
Still waiting for final body design, I have started the search for a bunch of RSR parts as well as a CAD file of the cage design, I have been going back and forth between turning this car into a semi correct RSR or a all out custom stripped down narrow body. So far I have 90% of the cage drawings done, tracked down cracked but repairable rsr flairs front and back, and the inner door panels. I have spe'cs for the windows which means that I have have them made in real cheap. Other stuff like the exhaust is easy enough to fabricate but I will need to sell my factory aero kit as well as the rims before I can really dig into the project.
I have even found a company with a big enough autoclave to make a single piece carbon fiber roof panel if I really wanted to go hard core when I pull the sunroof.
I only have 10K for the whole project, well plus the sale of the interior the rims/aero/seats/carpet/aircon/stereo/bumper supports/windows/airbags well you get the picture. I think that I can get it done if I do most of the fab and design work myself.
If I do the RSR it will be in some sort of factory or privte livery colors but the narrow body will be a complete change to orange without the stripe I believe.
Though I have seen this design and I am partial to it of a A10 warthog/p51 mustang front mouth with a gunmetal gray body and a bunch painted on rivits covering the whole car.
I have even found a company with a big enough autoclave to make a single piece carbon fiber roof panel if I really wanted to go hard core when I pull the sunroof.
I only have 10K for the whole project, well plus the sale of the interior the rims/aero/seats/carpet/aircon/stereo/bumper supports/windows/airbags well you get the picture. I think that I can get it done if I do most of the fab and design work myself.
If I do the RSR it will be in some sort of factory or privte livery colors but the narrow body will be a complete change to orange without the stripe I believe.
Though I have seen this design and I am partial to it of a A10 warthog/p51 mustang front mouth with a gunmetal gray body and a bunch painted on rivits covering the whole car.
#15
Originally Posted by WearyMicrobe
I have even found a company with a big enough autoclave to make a single piece carbon fiber roof panel if I really wanted to go hard core when I pull the sunroof.
...I only have 10K for the whole project
...I only have 10K for the whole project