tire pressure?
#17
Keeper of the Truth
Lifetime Rennlist
Member
Lifetime Rennlist
Member
No, I find that most 911 cars with the heavy weight bias to the rear react about the same to tire pressure differences. Also, Porsche's factory recommended pressures have also been the same on all 911 cars for as long as I remember.
#18
Track Day
Join Date: May 2001
Location: Los Angeles, CA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Viken Bedrossian:
[QB]
The factory recommended "cold" 36/44 is the least understood set of pressures. This contributes to a load of understeer, harsh ride and premature rear tread (center) wear. Some say that these pressures are a must for very high sustained speeds (Autobahn) but this only means that the 44 will soon reach and exceed 50 which is too hot for the tire....QB]
[QB]
The factory recommended "cold" 36/44 is the least understood set of pressures. This contributes to a load of understeer, harsh ride and premature rear tread (center) wear. Some say that these pressures are a must for very high sustained speeds (Autobahn) but this only means that the 44 will soon reach and exceed 50 which is too hot for the tire....QB]
Wouldn't over inflated rear tires grip less, leading to over steer? I know when my track tires over heat, they get really "greasy." My solution is to drop the hot pressure of the axle that is not gripping. Would you expand on that? Definitely 44 psi cold would be way to high on the track.
#19
Keeper of the Truth
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally posted by Dan T.:
<STRONG>
Viken,
Wouldn't over inflated rear tires grip less, leading to over steer? I know when my track tires over heat, they get really "greasy." My solution is to drop the hot pressure of the axle that is not gripping. Would you expand on that? Definitely 44 psi cold would be way to high on the track.</STRONG>
<STRONG>
Viken,
Wouldn't over inflated rear tires grip less, leading to over steer? I know when my track tires over heat, they get really "greasy." My solution is to drop the hot pressure of the axle that is not gripping. Would you expand on that? Definitely 44 psi cold would be way to high on the track.</STRONG>