What an Idiot....
#1
Pro
Thread Starter
Join Date: May 2001
Location: Carolina Motorsport Park
Posts: 659
Likes: 0
Received 0 Likes
on
0 Posts
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
Okay, now I really need help. I was tightening the three 13 mm nuts that held the bolts to the struts on the front of my 996. This is in the front under the plastic shroud that covers the air filter. One of the bolts snapped right flush against the car's frame. I was tighnening it to about 30 ft/lbs when this happened. Where can I get a replacement part for this and what is the torque setting?
#2
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
![Post](https://rennlist.com/forums/images/icons/icon1.gif)
Originally posted by Arthur:
<STRONG>I was tighnening it to about 30 ft/lbs when this happened. Where can I get a replacement part for this and what is the torque setting?</STRONG>
<STRONG>I was tighnening it to about 30 ft/lbs when this happened. Where can I get a replacement part for this and what is the torque setting?</STRONG>
Drill out the snapped bolt and replace with a new M8 nut/bolt.