FabSpeed Exhaust System!
#1
Burning Brakes
Thread Starter
Join Date: May 2004
Location: So. California
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
![Talking](https://rennlist.com/forums/images/icons/icon10.gif)
Hi all,
I just wanted to throw this out there just incase someone wanted them..... I sent out a set of FabSpeed Exhaust to a customer who REFUSED shipment ("wife didn't approve of purchase" was the reason
) and the box was sent right back to us UNOPENED.
I will give a $100.00 discount on the set just to move them.... If you are interested call or E-mail me and I'll make it happen!!!
Once I confirm the order I'll pass along instructions for the purchase! It's that simple....... I can have them ship today!!!!
I CAN SELL THEM WITH OR WITH OUT TIPS, EITHER WAY IT'S $100.00 OFF....
http://www.pelicanparts.com/catalog/...exhaus_pg2.htm
-Eli
(888) 280-7799 or eli@pelicanparts.com
I just wanted to throw this out there just incase someone wanted them..... I sent out a set of FabSpeed Exhaust to a customer who REFUSED shipment ("wife didn't approve of purchase" was the reason
![bowdown](https://rennlist.com/forums/graemlins/bowdown.gif)
I will give a $100.00 discount on the set just to move them.... If you are interested call or E-mail me and I'll make it happen!!!
Once I confirm the order I'll pass along instructions for the purchase! It's that simple....... I can have them ship today!!!!
I CAN SELL THEM WITH OR WITH OUT TIPS, EITHER WAY IT'S $100.00 OFF....
http://www.pelicanparts.com/catalog/...exhaus_pg2.htm
-Eli
(888) 280-7799 or eli@pelicanparts.com
Last edited by Eli at Pelican; 07-22-2005 at 04:16 PM.
#2
Burning Brakes
Thread Starter
Join Date: May 2004
Location: So. California
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Still available.... only had a couple of hits (questions) but they are still here just feet away from my office.... Let me know...... shipping is about $30.00
-Eli
-Eli
#7
R.I.P.
Rennlist
Lifetime Member
Rennlist
Lifetime Member
Join Date: Aug 2001
Location: New London, NH & Naples
Posts: 3,770
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I've had Fabspeeds on a 90, 91, 94, 98, and 2002 911s and I swear by them. I've met Joe F. and have visited their shop in PA. In fact Joe used my 02 996 for his production measurements because mine was a very early build. (no relationship or financial interest...just a very happy customer). Hadn't seen him in a few years and yet he found me at the PCA Parade in Hershey. He remembered me!
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Trending Topics
#9
Burning Brakes
Thread Starter
Join Date: May 2004
Location: So. California
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by tpitpit
I will buy if they are 800 or less? I am in San Diego.
![EEK!](https://rennlist.com/forums/images/smilies/eek.gif)
Thanks for all the questions etc. Hope to see some feedback real soon since the buyer also bought the Bypass system to test......
Look forward to some test results....!!!!
-Eli
#11
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
OK, I've installed the bypass pipes and here is my review, but before I start I want to state that Eli at Pelican Parts is a real standup guy and I will definately be dealing with again. I give him my highest recommendation.
The pipes:
Installation is a snap -what do I do with all the space behind the rear wheels now!?!
When I first started the car I was a little surprised at how quiet it was. Don't get me wrong, it wasn't quiet but I really thought the car would sound like a dragster. It has a low to moderate rumble at idle. During light acceleration the car again had a moderate rumble, and you can really hear when the variocam kicks in at around 3200 RPM. Moderate and heavy acceleration brings the beast to life with a growl. Not so loud as to hurt at all but there is no doubt the sound is loud. I think it sounds great! Cruising is not so good. There tends to be a drone (this is not the fault of the pipes but hearing the same RPM for a while gets tiring).
This is not the pipe for the daily driver unless you want to really hear the car.
I love it so much, I am not even trying the Fabspeed exhaust at all.
The pipes:
Installation is a snap -what do I do with all the space behind the rear wheels now!?!
When I first started the car I was a little surprised at how quiet it was. Don't get me wrong, it wasn't quiet but I really thought the car would sound like a dragster. It has a low to moderate rumble at idle. During light acceleration the car again had a moderate rumble, and you can really hear when the variocam kicks in at around 3200 RPM. Moderate and heavy acceleration brings the beast to life with a growl. Not so loud as to hurt at all but there is no doubt the sound is loud. I think it sounds great! Cruising is not so good. There tends to be a drone (this is not the fault of the pipes but hearing the same RPM for a while gets tiring).
This is not the pipe for the daily driver unless you want to really hear the car.
I love it so much, I am not even trying the Fabspeed exhaust at all.
#12
Burning Brakes
Thread Starter
Join Date: May 2004
Location: So. California
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by mitch236
OK, I've installed the bypass pipes and here is my review, but before I start I want to state that Eli at Pelican Parts is a real standup guy and I will definately be dealing with again. I give him my highest recommendation.
The pipes:
Installation is a snap -what do I do with all the space behind the rear wheels now!?!
When I first started the car I was a little surprised at how quiet it was. Don't get me wrong, it wasn't quiet but I really thought the car would sound like a dragster. It has a low to moderate rumble at idle. During light acceleration the car again had a moderate rumble, and you can really hear when the variocam kicks in at around 3200 RPM. Moderate and heavy acceleration brings the beast to life with a growl. Not so loud as to hurt at all but there is no doubt the sound is loud. I think it sounds great! Cruising is not so good. There tends to be a drone (this is not the fault of the pipes but hearing the same RPM for a while gets tiring).
This is not the pipe for the daily driver unless you want to really hear the car.
I love it so much, I am not even trying the Fabspeed exhaust at all.
The pipes:
Installation is a snap -what do I do with all the space behind the rear wheels now!?!
When I first started the car I was a little surprised at how quiet it was. Don't get me wrong, it wasn't quiet but I really thought the car would sound like a dragster. It has a low to moderate rumble at idle. During light acceleration the car again had a moderate rumble, and you can really hear when the variocam kicks in at around 3200 RPM. Moderate and heavy acceleration brings the beast to life with a growl. Not so loud as to hurt at all but there is no doubt the sound is loud. I think it sounds great! Cruising is not so good. There tends to be a drone (this is not the fault of the pipes but hearing the same RPM for a while gets tiring).
This is not the pipe for the daily driver unless you want to really hear the car.
I love it so much, I am not even trying the Fabspeed exhaust at all.
Mitch, Glad to see the by-pass worked out for you, I'll keep an eye out for your return of the Fabspeed Mufflers but like I said it's my vac time so I have Trinidad here to support you in my absence.
Take care and enjoy!
-Eli
#14
Burning Brakes
Thread Starter
Join Date: May 2004
Location: So. California
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by mbergeron
His wife didn't allow it
Come on , stop being a pantsy...do what I do..
Get it shipped to your office![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![nono](https://rennlist.com/forums/graemlins/nono.gif)
Come on , stop being a pantsy...do what I do..
Get it shipped to your office
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![manual](https://rennlist.com/forums/graemlins/rtfm.gif)
![Stick Out Tongue](https://rennlist.com/forums/images/smilies/tongue.gif)
Mitch "I'm sure" is the sort that would know how to handle it either way....
-Eli