Aero Kit 1
#2
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Front Spoiler 99 505 980 00 G2X
Lip 996 505 986 00
Rivets (11) 999 507 427 40
Rear Lid with Spoiler 996 512 901 00
Spoiler (Gurney Flap) 996 512 988 00
Strut 996 512 985 00
Sides 996 559 983/984 00 G2X
Lip 996 505 986 00
Rivets (11) 999 507 427 40
Rear Lid with Spoiler 996 512 901 00
Spoiler (Gurney Flap) 996 512 988 00
Strut 996 512 985 00
Sides 996 559 983/984 00 G2X
#6
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
This is what i did:
1. Measure the gurney flap and transfer the width dimensions to the lower plane of the spoiler.
2. Apply adhesive to the bottom of the gurney flap in the center and
along its entire length. Stick on the gurney flap flush with the radius transition of the edge at the lower plane of the spoiler. Make sure that the gurney flap is
parallel with the edge. Immediately remove any emerging adhesive.
Hope this helps...
1. Measure the gurney flap and transfer the width dimensions to the lower plane of the spoiler.
2. Apply adhesive to the bottom of the gurney flap in the center and
along its entire length. Stick on the gurney flap flush with the radius transition of the edge at the lower plane of the spoiler. Make sure that the gurney flap is
parallel with the edge. Immediately remove any emerging adhesive.
Hope this helps...