Pics in the paint shop....
#1
Burning Brakes
Thread Starter
Join Date: May 2004
Location: So. California
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
Pics in the paint shop....
My car is in the paint shop right now and has received it's colors..... I'm going to probably see it again today but thought I would post a photo from Friday....
I'll keep the photos updated as I get them....
-Eli
I'll keep the photos updated as I get them....
-Eli
#3
Nordschleife Master
Why are you repainting the whole car ??
#5
Burning Brakes
Thread Starter
Join Date: May 2004
Location: So. California
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
Well I originally wasn't going to paint the entire car but after some further consideration, scratches, dents, chips etc. etc...... I actually started out with the front end and decided to upgrade to the Aero Kit and then it went from there. I figured it would just be better to pay the price now and enjoy the benefits of being 100% happy with the results. The car has been sitting (painted) in the shop since last Friday and I going to let it cure until Monday when I have given Raj and his crew the "go ahead" to start color sanding and buffing.....
This car should be complete to take out Friday or before…..
-Eli
This car should be complete to take out Friday or before…..
-Eli
#7
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Eli - clean off your camera lens!
__________________
Eric
Chief Plug Guy
BumperPlugs.com
2022 GT3 Touring
2009 997 Turbo Cab
2018 M2 6sp
Gone but not forgotten
2004 C4S Cabriolet
1999 C2 Cab
Eric
Chief Plug Guy
BumperPlugs.com
2022 GT3 Touring
2009 997 Turbo Cab
2018 M2 6sp
Gone but not forgotten
2004 C4S Cabriolet
1999 C2 Cab
Trending Topics
#8
Burning Brakes
Thread Starter
Join Date: May 2004
Location: So. California
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
New Photos
I was able to get to the shop yesterday and take a couple more shots. They are in the last days with this car of mine. They just put the windshield back in..... The side windows are next while the final rub down takes place.....
#11
Burning Brakes
Thread Starter
Join Date: May 2004
Location: So. California
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=Eric - Plug Guy]Eli, did you check the front passenger door/fender area yet? Looks like a problem to me.
QUOTE]
Eric,
I asked about that too when I went to see the car "good eye"
They still need to remove the fenders once again and realign the doors (doors, fenders, lights, glass and interior was removed during this job!). I was a little taken when I first saw this but after the explanation I was at ease...
Raj: in Culver City is doing the work and works mainly on the 996. He’s the man to go to if you’re looking for a wide body conversion!!!!
-Eli
QUOTE]
Eric,
I asked about that too when I went to see the car "good eye"
They still need to remove the fenders once again and realign the doors (doors, fenders, lights, glass and interior was removed during this job!). I was a little taken when I first saw this but after the explanation I was at ease...
Raj: in Culver City is doing the work and works mainly on the 996. He’s the man to go to if you’re looking for a wide body conversion!!!!
-Eli
Last edited by eli at P; 01-25-2005 at 09:28 PM.
#12
Burning Brakes
Thread Starter
Join Date: May 2004
Location: So. California
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
SOLD....
Oh yah, One last thing! The wheels have been sold as of yesterday....
I'm still debating on using the set of 19" HREs I have...... For now it's going to be the Porsche 2-piece 10 spokes.....
-Eli
I'm still debating on using the set of 19" HREs I have...... For now it's going to be the Porsche 2-piece 10 spokes.....
-Eli
#13
Burning Brakes
Thread Starter
Join Date: May 2004
Location: So. California
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
Final Pictures......
Well here it is...... After some time I finally get to pick up my car tomorrow!!!!
First off let me say a big "Thank You" to Raj of Venice Collision Experts..... You guys over there were real nice about helping me out from start to finish.
If you are interested in having your P-car redone or maybe custom wide in the rear then Raj is the man! I was able to see them at work during a couple of those wide body conversions and let me tell you, they did it right; "all metal".....
Venice Collision Experts is located in Venice California (310) 202-1555.... If you are really interested in some quality work then he's got my recomendation!
I'm posting a few pictures I have here compliments of Raj......
-Eli
First off let me say a big "Thank You" to Raj of Venice Collision Experts..... You guys over there were real nice about helping me out from start to finish.
If you are interested in having your P-car redone or maybe custom wide in the rear then Raj is the man! I was able to see them at work during a couple of those wide body conversions and let me tell you, they did it right; "all metal".....
Venice Collision Experts is located in Venice California (310) 202-1555.... If you are really interested in some quality work then he's got my recomendation!
I'm posting a few pictures I have here compliments of Raj......
-Eli
#15
Burning Brakes
Thread Starter
Join Date: May 2004
Location: So. California
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
You got it...
Originally Posted by Itzkirb
Eli, you need to lower that sucker!
"Great minds..."
-Eli