Baz8

Hi, recently got a 996 C4S tiptronic which I been doing some work on, doing mild mods.
It should of and felt pretty straight forward to get the brake pedal cover on from Numeric but something doesn't seem right just want to see if I missed something.

So the photos I see online of the sample image for the brake (below) shows the arm connects to the pedal around the center, but on my 996 it's a single piece so there's no lip between the arm and pedal itself.



Looking at the back plate of the cover, there's cut outs that look to be for the brake arm, but the cut outs don't line up correctly it looks like the cutouts anticipated the arm to be far more left than it is, almost as if these cut outs need to be swapped.

Just wanted to see if anyone has experience or installed these before I reach out to Numeric to see if maybe they sent ones for a different model not the 996.