Notices
996 Forum 1999-2005
Sponsored by:

shifting problem

Thread Tools
 
Search this Thread
 
Old 11-04-2023 | 07:18 PM
  #1  
Bbiela's Avatar
Bbiela
Thread Starter
Rennlist Member
 
Joined: Aug 2018
Posts: 124
Likes: 52
From: Chicago
Default shifting problem

When I shift into 1st, 3rd and 5th and reverse the car will not go into gear and it feels as if its in neutral. 2nd, 4th and 6th are fine. Is this a cable problem?
Old 11-04-2023 | 08:23 PM
  #2  
Eric Kessel's Avatar
Eric Kessel
Addict
Rennlist Member

 
Joined: Feb 2003
Posts: 762
Likes: 66
From: AZ/CA
Default

Look under the car where the cables connect to the transmission, sounds like one of the cable housings pulled out of its holder (not uncommon). You can put it back where it belongs and zip tie it down as a “temporary” solution….

if you search the forums there are a few posts with pictures…..

-Eric
The following users liked this post:
Bbiela (11-04-2023)
Old 11-07-2023 | 12:30 PM
  #3  
Eric Kessel's Avatar
Eric Kessel
Addict
Rennlist Member

 
Joined: Feb 2003
Posts: 762
Likes: 66
From: AZ/CA
Default

Find the problem?

-Eric



Quick Reply: shifting problem



All times are GMT -3. The time now is 11:04 AM.