IMS Solution installer recommendation???
Thread Starter
Pro
Joined: Jul 2021
Posts: 614
Likes: 588
From: Middle Tennessee
Having just gone through this, I’m in the camp of addressing the items that are known failure points and waiting on other wear items.
I agree that the clutch and flywheel can wait. You may not even need a new flywheel when the time comes, Mine didn’t at 75k.
Really think about doing doing the AOS, water pump and chain tensioners. Remember
that those plastic parts have become brittle over 20 years and need to be addressed based on age, not mileage.
That said, with mileage that low, go with the IMS solution and UAOS.
I agree that the clutch and flywheel can wait. You may not even need a new flywheel when the time comes, Mine didn’t at 75k.
Really think about doing doing the AOS, water pump and chain tensioners. Remember
that those plastic parts have become brittle over 20 years and need to be addressed based on age, not mileage.
That said, with mileage that low, go with the IMS solution and UAOS.
Advanced
Joined: Oct 2021
Posts: 91
Likes: 21
From: Bow, NH
Thanks for your thoughts but this wasn't about what was needed to be done as I knew that already .. it was if anyone had experience with either of the certified installers... needless to say I've already had a it done and highly recommend Ohara Autmotive..photos and other things in my build thread.. link in signature below