How to separate door molex?
#1
Advanced
Thread Starter
How to separate door molex?
Ok, lame question... how does one separate the two halves of the connector harness in the door? I managed to get the rubber out of the door and body... but feel like i'm going to break something trying to pry the two halves apart. There's probably a release on the connector somewhere that I'm not pushing... after 1.5hrs messing with it i figure it's time to ask... what's the trick?
Answer: I didn't realize the black clip on the bottom of the connector has a second step. After trying everything else, I pried the clip out even further with a flat screwdriver and to my surprise it popped to a second notch... then the connector pretty much fell in half.
Answer: I didn't realize the black clip on the bottom of the connector has a second step. After trying everything else, I pried the clip out even further with a flat screwdriver and to my surprise it popped to a second notch... then the connector pretty much fell in half.
Last edited by rollandburn; 04-06-2021 at 06:23 PM.
The following users liked this post:
dougn (04-06-2021)
#2
Burning Brakes
A timely post since I'll be doing it soon!