Anyone just lower the front..
#1
Racer
Thread Starter
Join Date: Jun 2003
Location: Grayson, Ga / Highlands, NC
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
![Question](https://rennlist.com/forums/images/icons/icon5.gif)
The front of my car looks a little high to me. I don't want to lower the whole car, just the front a bit. Has anyone done that?
![](http://forums.rennlist.com/upload/mvc009f.jpg)
#3
Keeper of the Truth
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If you went with the ROW suspension, your car will lower ~20 mm in front and ~10 mm at rear. That, I think, is your best bet.
http://www.carnewal-europe.com/cpx_p96063.htm
http://www.carnewal-europe.com/cpx_p96063.htm
#5
Instructor
Join Date: Jul 2003
Location: Homeless, Earth
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I already have to be careful enough as it is to not scrape the front on small inclines. Personally, I wouldn't want it any lower than the stock 4S setup.
Just went to a Blockbuster last night and coming out of the parking lot is an uphill slop onto the street - gently scrapped the black underguard piece. argh!
Just went to a Blockbuster last night and coming out of the parking lot is an uphill slop onto the street - gently scrapped the black underguard piece. argh!
#6
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I would worry that you would upset the balance of your car if you just lowered the front. I agree that the ROW 030 is a great, safe way to lower your car without worrying whether or not you're changes have changed its handling characteristics.