Help power steering line
03-22-2019, 03:05 AM
#1
3rd Gear
Thread Starter
Join Date: Mar 2019
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Help power steering line
Hello I just installed a new engine in my 996 c4 manual. I went to start it and the smaller power steering line at the rear coupler blew apart. I believe there is supposed to be some sort of metal retaining clip in the connector that looks like a metal basket. Mine is missing this piece. Does anyone know the proper name for this part and where I can purchase one?
03-22-2019, 04:08 AM
#2
Rennlist Member
What year?
You blew out or left off an o-ring.
You blew out or left off an o-ring.
03-22-2019, 04:13 AM
#3
3rd Gear
Thread Starter
Join Date: Mar 2019
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
2000 cab c4
It isn't an o ring I took the connector apart after it blew off of the hard line coming from the body side its missing the black clip that looks like a little metal basket. I just don't know the name of that clip or part number
03-22-2019, 04:22 AM
#5
Rennlist Member
I understand. Check your o-ring though and don't over tighten the lines.
The piece is a plastic inner locking clip (mine works fine with out)
I don't know if you can buy that piece alone but try calling Pelican Parts and ask.
The piece is a plastic inner locking clip (mine works fine with out)
I don't know if you can buy that piece alone but try calling Pelican Parts and ask.
Last edited by 808Bill; 03-22-2019 at 05:04 AM.