Momo steering wheel install
01-04-2018, 03:43 PM
#1
Advanced
Thread Starter
Momo steering wheel install
I’ve decided I’d like to have a momo prototipo steering wheel on my 996 for a little while at least. I’m looking for a shop or someone in so cal who can install it and keep the horn working and defeat the airbag light. Not sure it’s something I’d like to attempt myself without step by step instructions. I can even live with the airbag light on. Thanks
01-04-2018, 05:01 PM
#3
Advanced
Thread Starter
I haven’t bought the wheel yet. send me some kind of info for purchase. I’d be willing to install myself with some kind of instructions. Would there be any PSM issues with removing the airbag?
01-04-2018, 07:27 PM
#4
Race Director
PSM and the airbag are completely unrelated. If you don't want the airbag light on, install a resistor in place of the airbag module. 2.7 or 2.8 Ohm @ 0.5W.
I believe PSM monitors steering angle, but the airbag is uninvolved.
I believe PSM monitors steering angle, but the airbag is uninvolved.
01-04-2018, 10:25 PM
#5
Advanced
Thread Starter
thanks for the info! I think I will try and install it myself now
01-04-2018, 11:54 PM
#6
Race Director
Be careful with the airbag removal. Disconnect the battery, follow precautions outlined in the various airbag removal threads here and Pelican. You can de-finger yourself - or worse - in milliseconds.
Not suggesting you should be fearful, but explosives are like firearms...intolerant of mistakes.
Not suggesting you should be fearful, but explosives are like firearms...intolerant of mistakes.
01-08-2018, 07:40 PM
#7
Former Vendor
I started back up my old website, here's a link to the Prototipos I have. http://www.w33motorsports.com/search...e=1&brand=MOMO
Let me know if you have an questions.
-Jason
Let me know if you have an questions.
-Jason