Upload pictures without tires.. what do you guys think?

 

Hard to gauge without a tire or straight edge but from what I can tell looks great!

Love those wheels. Would you mind sharing your contact/supplier? Thanks.

 

i love those LMs, looks very good.

 

Once you have tires on and the suspension is loaded, we will have a much better gauge and this depends on your camber too. Although I'm inclined to think 18x11 et 56 will require possibly a spacer.

 

I am picking up my Polar Silver C4S tomorrow, and I have the same size and offset wheels (18x8.5 and 18x11 ET56). Mine are reverse mounted (all four wheels) and no spacers were required.

I can put up a couple more photos when I have my car back but here are a couple from the shop.

 

The reverse mounting makes the offset around 44

 

stupid question guys...

what happens if i dont reverse mount nor put a spacer?

just looks funny or wont be able to fit it?

 

@991.2 what tire size did you use?

 

I'm pretty sure it should fit, on the rears the clearance problem usually isn't inboard. It probably won't look bad either, just wheel arches not filled out optimally. Mainly a cosmetic thing and rarely a mechanical problem unless the offsets are really off causing stress on components.

 

235/40 fronts
295/30 rears

 

@Basel Skull, i have decided to add some h&r spacer since i am not going to reverse mount it.

Would a 1/4 spacer be ok?