jlohman1

Hello fellow Porsche owners. I recently moved to Az from Indianapolis where I had an excellent service provider in Euro Motorworks. Now that I am here I need to find a service center to replace my 993tt lower valve cover gaskets and plug/wire and a leak down test. I was going to do the project myslef as I have done all of my other Porsche mods myself, BUT I do not have a place to do it at the moment. So in October I had purchased all of the gaskets, sealing rings...ALL of them...and all new factory Porsche hardware so I have all of the bits (about $1200 worth). I found that Beck's will use my factory Porsche parts and install them. My question is as anyone had work done there before on a 993tt??? I origionally wanted Patrick Motorsports in Tempe to do the work but they will not accept my parts (that I have had since October so cannot return) whom I would have been a returning customer most likely....bummer! Suggestions?

AC/911's

http://www.donjacksonent.com/

Texas993

+1

2qwik4u

Frank Beck is awesome!

SSTAR

TurboKraft has been great for me. Chris is my contact there. Check them out. They know these cars in and out.

jlohman1

Thanks guys for all of you input. I am getting a quote from Don Jackson and I will give Turbo Kraft a ring on Monday.

notfastenough

Beck's European.
I hear Frank will work with Rennlisters. I've seen him be very generous.
At least give him a chance to match or beat.
Service is impeccable and you won't need a fresh Tetanus shot to walk through his shop.

AC/911's

The do thorough PPI's & will find REAL #'s on Leak-downs, Especially 3.6 Turbo's.

Patrick Motorsports does Great Bodywork & Custom Fabbing That DJ's does not do.