FINALLY...993 TT size SLOTTED ROTOR, properly done - full floater - July!
#1
Former Vendor
Thread Starter
FINALLY...993 TT size SLOTTED ROTOR, properly done - full floater - July!
I'ts a miracle!
Finally, there will be a top quality properly slotted full floating rotor for the 993TT rotor size --- available in July (undergoing track testing now)
Will look 99% just like this:
Finally, there will be a top quality properly slotted full floating rotor for the 993TT rotor size --- available in July (undergoing track testing now)
Will look 99% just like this:
#5
Former Vendor
Thread Starter
I use some sort of 993TT adapted hack job on mine; the slots are deep, are plunge cut at a sharp angle, and extend through both the inner and outer edges - all NOT good attributes and make great places for cracks to go nuts.
For now these will be front only
For now these will be front only
Trending Topics
#11
Former Vendor
Thread Starter
No plans, not really needed as most issues are with the fronts which do 80% of the stopping and incurr so much abuse with the holed / improperly slotted rotor setups out there.
#12
I would be interested in slotted rotors for the rear as well. I bet we could gather 10 people here who would want a set for the rear.
Btw, a "floater" is something completely different in my book.. . . .
Btw, a "floater" is something completely different in my book.. . . .