911PERVY

What are you guys running spacer wise on the rear of your TT's with standard suspension and wheels? I was thinking 18mm

David in LA

I have 18mm on the 10.5" Techarts...effective offset is ET28

ca993twin

I tried a 1" spacer on Waldo, with 10.5x18 Kinesis wheels and 295 Yokohama tires, and experienced some weird, unexpected handling. Rufus uses a 1" Ruf spacer on 11x19 Ruf wheels and 315 Toyo tires... handles like a dream. Go figure... I don't get it.

dbf73

something to do with the brand/design of the spacer?

ca993twin

Doug,

More likely... the tires. I may have had a mismatched pair. I don't remember. But the spacer made it pretty weird.

cgfen

What is the ET of the wheels you are using?
That is a primary determinate if spacers are desired / required.

Craig

Greg H.

He said standard wheels. A lot depends on your ride height and camber. I'm at almost RS ride height with - 2.4 camber and 8mm works just fine. Can't really say about 18mm as I don't have the spacers on my car right now to see how much room is left.

Greg H.

Ziad

Steve, did you have to roll the fenders out of interest?

911PERVY

Car is all standard although a UK spec car is lower than your US settings?

Im thinking maybe a 15mm...............I'll have a play over this weekend and post some pics B&A

David in LA

This is 10.5" ET28 with a 295/30 tire

911PERVY

OK, fitted 15mm spacers last night, here she is before;

911PERVY

and here she is after;

911PERVY

And from the front after;

David in LA

That looks pretty good...what brand of spacers did you use? Source? I'm thinking of reducing the spacers and going with a wider tire.

911PERVY

I used these