Ruf CTR-2 shifter?
#1
Boost Junkie
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: Jan 2004
Location: Plymouth MN and Scottsdale AZ
Posts: 2,526
Received 38 Likes
on
31 Posts
Ruf CTR-2 shifter?
recently, I was asked to move a yellow CTR-2 during a photo shoot. The shifter seemed VERY different from my car - much shorter throws and very tight/lacking in slop. The owner was not around so I couldn't ask any questions. What did Ruf use for a shifter? Was this a 2WD or 4WD car? In hindsight, I should have at least looked to see if it had front axles or a dimpled tunnel cover.
ps - my car was parked next to it during the shoot. I felt like a pair of brown shoes with a tuxedo
ps - my car was parked next to it during the shoot. I felt like a pair of brown shoes with a tuxedo
#4
Drifting
Doug,
I have 97 993TT and asked Ruf in Germany this week about their short shift kit - the answer was "not recommended due to drive shaft tunnel, could be done but you would need to do a lot of metal working."
I don't know of anyone who has a plug and play version yet....maybe a RS version would work??
Derek
I have 97 993TT and asked Ruf in Germany this week about their short shift kit - the answer was "not recommended due to drive shaft tunnel, could be done but you would need to do a lot of metal working."
I don't know of anyone who has a plug and play version yet....maybe a RS version would work??
Derek
#5