Standard Size and Offset 993TT
06-19-2003, 08:50 PM
#3
Nordschleife Master
I think the size is 18x8 and 18x10, and the rear offset is 40mm. Not sure about the front offset, but its the same for all 993s, widebody and narrowbody.
06-19-2003, 08:55 PM
#4
Rennlist Member
Join Date: May 2001
Location: New Jersey, USA
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
Hollow spoke stock OEM 993TT wheels.
Front 18 by 8 - ET52
Rear 18 by 10 - ET40
Normally aspirated 993 cars came with 17 and 18 inch wheel choices. Offset varied depending on narrow or wide body.
Front 18 by 8 - ET52
Rear 18 by 10 - ET40
Normally aspirated 993 cars came with 17 and 18 inch wheel choices. Offset varied depending on narrow or wide body.
06-19-2003, 08:56 PM
#5
Keeper of the Truth
Lifetime Rennlist
Member
Lifetime Rennlist
Member
993 Turbo standard factory wheels:
8" x 18" - ET52
10" x 18" - ET40 (does NOT fit narrow body)
As to other 993 wheels, there were various sizes and offsets. What are you looking for?
8" x 18" - ET52
10" x 18" - ET40 (does NOT fit narrow body)
As to other 993 wheels, there were various sizes and offsets. What are you looking for?
06-19-2003, 08:59 PM
#6
Keeper of the Truth
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by Peter S 993tt
Size - 7.5X18 and 10X18. Offset - I don't know.
06-19-2003, 09:06 PM
#7
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Hey Viken,
I am running the 996TT wheels on my 993 C4S. Fronts are, I believe 18x8 and rears are 18x11. Can you tell me the offsets on these? Thanks.
Addison
I am running the 996TT wheels on my 993 C4S. Fronts are, I believe 18x8 and rears are 18x11. Can you tell me the offsets on these? Thanks.
Addison
Trending Topics
06-19-2003, 09:29 PM
#8
Rennlist Member
Join Date: May 2001
Location: New Jersey, USA
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
996TT wheel sizes (hollow or solid spoke)
Front - 18 by 8 ET 50 (offset number corrected per Viken's post)
Rear - 18 by 11 ET 45
993C4S came with solid spoke
Front - 18 by 8 ET 52
Rear - 18 by 10 ET 40
Front - 18 by 8 ET 50 (offset number corrected per Viken's post)
Rear - 18 by 11 ET 45
993C4S came with solid spoke
Front - 18 by 8 ET 52
Rear - 18 by 10 ET 40
06-19-2003, 11:32 PM
#9
Keeper of the Truth
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by adsc4s
I am running the 996TT wheels on my 993 C4S. Fronts are, I believe 18x8 and rears are 18x11. Can you tell me the offsets on these? Thanks.
8" x 18" - ET50
11" x 18" - ET45
11-30-2004, 01:38 PM
#13
Addict
Rennlist Member
Rennlist Member
Thank you........Where?
Sorry..............don't remember company, been so long.
They used to advertise in Pano, and sold a number of lucite products inc window replacements.
I believe I've seen them recently.......search for plastic or lucite race products.
They came clear.....I painted......4 or 5 patches of 2 sided tape for ea use.
Sorry..............don't remember company, been so long.
They used to advertise in Pano, and sold a number of lucite products inc window replacements.
I believe I've seen them recently.......search for plastic or lucite race products.
They came clear.....I painted......4 or 5 patches of 2 sided tape for ea use.
11-30-2004, 02:34 PM
#15
Addict
Rennlist Member
Rennlist Member
Marty........they are.
But I'm **** about the way fitments sit in wheel arches for offset & ride height (and if I turn in poor course times, at least people will say....the car looked cool
).
Also I have garage full of spacers/wheels/bolts.......gotta pass the time somehow.
Seriously........this car rarely turns in poor times
But I'm **** about the way fitments sit in wheel arches for offset & ride height (and if I turn in poor course times, at least people will say....the car looked cool
). Also I have garage full of spacers/wheels/bolts.......gotta pass the time somehow.
Seriously........this car rarely turns in poor times