993TT US vs ROW spring
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jan 2002
Location: Left Coast
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
993TT US vs ROW spring
Comparing my recently deinstalled ROW spring against the original US version, notice that the ROW front spring is progressive while the US look linear.
On the other hand the ROW rear spring are much shorter than the US version.
On the other hand the ROW rear spring are much shorter than the US version.
#2
Guru
Lifetime Rennlist
Member
Rennlist Small
Business Sponsor
Lifetime Rennlist
Member
Rennlist Small
Business Sponsor
I was comparing my springs when I swapped them a few weeks ago. US M030 vs ROW M030. The rear springs measure identically wire diameter and coil spacing etc., just almost a coil shorter. I'll bet there's a guy at the factory that just cuts off that coil and relabel the spring as ROW
The fronts are definately progressive...
The fronts are definately progressive...
#4
Keeper of the Truth
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally posted by chris walrod
I was comparing my springs when I swapped them a few weeks ago. US M030 vs ROW M030. The rear springs measure identically wire diameter and coil spacing etc., just almost a coil shorter. I'll bet there's a guy at the factory that just cuts off that coil and relabel the spring as ROW
I was comparing my springs when I swapped them a few weeks ago. US M030 vs ROW M030. The rear springs measure identically wire diameter and coil spacing etc., just almost a coil shorter. I'll bet there's a guy at the factory that just cuts off that coil and relabel the spring as ROW