Cemoto

Sweet spot= Sport cats/stage I's . I wholly concur.....

However;

The marginal propensity of speeding ticket occurrences increases.

Fuel economy decreases.

Fun factor increases exponentially!

Enjoy!!!



FYI - be careful of the OS sensor wires when removing them. When you remove the sensors leave the wires in the counter-clockwise wound up position, they will straighten out upon re-insertion.

.

Foxman

Stage III's weigh about 10 lbs. each, Stage II's weigh 12 lbs. each, and the Fister I's weigh about 16 lbs. each. I will double check the weight of the Fister I's when I swap them out (again) for the Fister II's.

EMBPilot

Thanks guys
I generated a shipping label for 36 pounds should be plenty.

thanks Al, looking forward to hearing this

911F1

36lbs will be good! Swap in progress

911F1

14lbs for stage 2 and 16.8lbs stage 1

EMBPilot

lol good work John!!!

coreseller

I may be following suit. I love the way it sounds but my neighbor has commented twice now.

earossi

EMB, I originally didd Fister 2's and sport cats on my car, and it was too loud for my neighborhood. Loved the sound, but it was a tad too much. Ended up removing the sport cats. With only the Fister 2's and stock cats, the car sounds very good. No angry faces from the neighbors.

EMBPilot

IIs are perfect w stock cat, there's no doubt about it. But I really wanted to get rid of 22 year old catalytic converter. At that age nothing good is going on in there.

Gbos1

I like waking up my neighborhood Love the Fister Stage III.

Cemoto

Fixed it a little. . . .

EMBPilot

is there a difference other than the flanges??

P-daddy

Kevin- I believe the Bischoff cats have an actual window for cross flow of exhaust. Gillett cats have a plate right in the middle.

EMBPilot

Between flanges, donuts, cats, fastening hardware, this has been a learning experience

John@Fabspeed

+10 on trying out the Fister II with our SCXP, it is an awesome combo and I would most definitely do some WOT passes by your neighbor's house