Tlaloc75

The BFH approach worked. After a night-long soak in PB Blaster and a couple good thwacks, it came right out.

trophy

That is awesome.... When installing the new axles, make sure you put copper grease on the splines of the new axle. Its also worth giving the inside of the stub axle a quick brush with a small stainless steel detail cleaning brush, so everything will go back together nicely and if it has to be removed again will be nice and easy.

Tlaloc75

Yes I have some Permatex Copper for the splines. Thanks for the tip regarding the brush.

I have a much larger problem now . See my thread start here: https://rennlist.com/forums/993-foru...tastrophe.html

I'd really appreciate any help you can give me.

trophy

Responded....