Notices
993 Forum 1995-1998

Locating Radar Detector

Thread Tools
 
Search this Thread
 
Old May 1, 2003 | 06:34 PM
  #1  
reltub's Avatar
reltub
Thread Starter
AutoX
 
Joined: Dec 2002
Posts: 10
Likes: 0
From: Boston MA
Post Locating Radar Detector

What is the black arc at the top of the windscreen, and does a radar detector ( unfortunately only a Bell at this time ) need to be installed below this or is it transparent to the radar beams ?

Thanks
Reply
Old May 1, 2003 | 06:37 PM
  #2  
Randy M's Avatar
Randy M
Race Car
20 Year Member
 
Joined: Oct 2002
Posts: 3,649
Likes: 1,081
Post

I would mount it below this black spot you speak of. I have a Bel980 and it is a great detector. It has saved me many many times. Especially going down I-5 to Cali. <img border="0" alt="[cheers]" title="" src="graemlins/beerchug.gif" />
Reply
Old May 1, 2003 | 06:41 PM
  #3  
reltub's Avatar
reltub
Thread Starter
AutoX
 
Joined: Dec 2002
Posts: 10
Likes: 0
From: Boston MA
Post

Ideally I would like to put it up close to or on the roof so it is less obvious but I can't figure out whether the radar beams will pass through the black section.

Where have you mounted yours ?
Reply
Old May 1, 2003 | 06:45 PM
  #4  
Randy M's Avatar
Randy M
Race Car
20 Year Member
 
Joined: Oct 2002
Posts: 3,649
Likes: 1,081
Post

I have mine mounted via the suction cups in the lower center of the windshield. It also has a direct shot through rear window for rear laser detection.
Reply
Old May 1, 2003 | 06:49 PM
  #5  
JPS's Avatar
JPS
Addict
Rennlist Member

20 Year Member
 
Joined: May 2002
Posts: 4,708
Likes: 25
From: Manhattan
Post

Yeah, I'm with Randy...I don't worry too much about being conspicuous or not...a shiny 911 gets attention with or without radar...either I'm speeding or I'm not, I'm caught or I'm not...I need to see that sucker though.
Reply
Old May 1, 2003 | 06:51 PM
  #6  
Randy M's Avatar
Randy M
Race Car
20 Year Member
 
Joined: Oct 2002
Posts: 3,649
Likes: 1,081
Post

Tell me about it. Mine's red
Reply
Old May 1, 2003 | 06:55 PM
  #7  
96P993's Avatar
96P993
Pro
 
Joined: Jan 2003
Posts: 673
Likes: 0
From: plano
Post

Randy and JPS are both right..My V1 is installed right below my mirror with the suction cups. My big key to mounting it close to the mirrow was being able to hide the wire...I hate wires!!
Reply
Old May 1, 2003 | 07:30 PM
  #8  
Pete Lech's Avatar
Pete Lech
Addict
Rennlist
Lifetime Member

20 Year Member
 
Joined: Jul 2001
Posts: 1,157
Likes: 3
From: Miramar Beach, Florida
Post

My V1 is mounted just above the dash, where it can "see" out the back window, plus it is easy to see and to hit the mute button. I hard wired it, and tucked the wire in the trim at the base of the windshield. Nice and clean. No more dangling cord and no more dead batteries.
Reply
Old May 1, 2003 | 07:38 PM
  #9  
reltub's Avatar
reltub
Thread Starter
AutoX
 
Joined: Dec 2002
Posts: 10
Likes: 0
From: Boston MA
Post

Any pictures out there of installed units ?

I want to hide the wires and if it can't go up above the rear view mirror ( what is that black arc ?) then the second best place is as low down as I can get it with a path still out of the back .

Alternatively I could just slow down ! thats not going to happen is it ?
Reply
Old May 1, 2003 | 07:40 PM
  #10  
KMR1200's Avatar
KMR1200
Rennlist Member
20 Year Member
 
Joined: Jun 2001
Posts: 712
Likes: 56
From: Lake Tahoe, CA
Post

reltub, there is a DIY on this at p-car.com . Also, when the archives are back functioning tonight, there are posts from Dan in St. Louis about attaching the main unit above the mirror.
Reply
Old May 1, 2003 | 08:17 PM
  #11  
96P993's Avatar
96P993
Pro
 
Joined: Jan 2003
Posts: 673
Likes: 0
From: plano
Post

Here is a picture of mine on my windshield. I dont even use the visual part of the radar since I have the hidden display but I have to say it is right in front of your face if needed...might be a good choice for the passport. <img src="http://members.rennlist.com/96p993/wind1.jpg" alt=" - " />
Reply
Old May 1, 2003 | 08:18 PM
  #12  
96P993's Avatar
96P993
Pro
 
Joined: Jan 2003
Posts: 673
Likes: 0
From: plano
Post

Sorry for the size of the picture..I made it smaller but it looked distorted..
Reply
Old May 1, 2003 | 08:40 PM
  #13  
reltub's Avatar
reltub
Thread Starter
AutoX
 
Joined: Dec 2002
Posts: 10
Likes: 0
From: Boston MA
Post

Thanks for all the help. The Valentine unit is samller than the Bell but I will try to find somewhere it will not obstruct my view and can be made to look neat

Thanks
Reply
Old May 2, 2003 | 04:54 AM
  #14  
ksimpson's Avatar
ksimpson
Racer
 
Joined: Jan 2003
Posts: 332
Likes: 0
From: Dublin, Ireland
Post

My V1 is mounted on the visor with the supplied visor clip. Radar detectors are illegal in Ireland so it's well out of the way from prying eyes but still has enough room for detection to the front and rear.

I had a Bel 990 originally. The V1 is a big step above.
Reply
Old May 2, 2003 | 09:56 AM
  #15  
reltub's Avatar
reltub
Thread Starter
AutoX
 
Joined: Dec 2002
Posts: 10
Likes: 0
From: Boston MA
Post

I'll try to fit it this weekend but I still wonder what the black arc on the top of the windscreen is for ?
Reply



All times are GMT -3. The time now is 10:12 PM.