jw97C2S

I bought the Becker Aux conversion kit a while back and seem to have misplaced the directions as to changing the CDR-210 from stereo mode to Aux mode. Does anyone know the button sequence?

Thanks
Jim

Bill 993

Not sure it's the same for the CDR-210, but the directions for a CDR-220 are:
1. Turn Radio on
2. Press and Hold The V (Porsche) button for 8 seconds, until "Becker 1" is displayed
3. Turn the Tuning **** until AUX OFF is displayed
4. Press either button located directly under the Arrows on the display to change the present setting from OFF to ON
5. Turn radio OFF
6. Auxiliary Audio input has not been activated.

jw97C2S

Bill

Thanks for the info. I tried to adapt your instructions to the CR210 but to no avail. Thanks for relaying the instructions. Strangely enough, I asked the question on the Becker Board and Becker answered that the aux kit wasn't available for the CDR/CR 210. I've been using it on my CR210 for 6 mos. I did misstate the head unit number (it's a CR210) so maybe that will make a difference.

Thanks again
Jim