new front rubber brake line problem
03-28-2013, 10:33 PM
#1
Racer
Thread Starter
Join Date: Apr 2010
Location: italy
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
new front rubber brake line problem
Hi all,
Changing the brake line with Porsche OEM (pet number 1;2;3)in the front end,
I wasn't able to get back the clip(pet number 7),because the C-barrel shaped connection of the rubber line(993.355.139.00) didn't line-up with the frame/body holder(also C-Shaped).
No matter what I did(switch the cables even if they had the same part number,turn them,etc)I wasn't able to align them.
The copper lines (pet number 5;6) on the other side didn't twist while disconnecting the old lines,
so I'm wondering what I'm missing
thank you.
cheers and hoping to test my new pss10 very soon!
*
Changing the brake line with Porsche OEM (pet number 1;2;3)in the front end,
I wasn't able to get back the clip(pet number 7),because the C-barrel shaped connection of the rubber line(993.355.139.00) didn't line-up with the frame/body holder(also C-Shaped).
No matter what I did(switch the cables even if they had the same part number,turn them,etc)I wasn't able to align them.
The copper lines (pet number 5;6) on the other side didn't twist while disconnecting the old lines,
so I'm wondering what I'm missing
thank you.
cheers and hoping to test my new pss10 very soon!
*
