FS- Shift knob, brake handle and ignition cover
03-05-2013, 02:24 AM
#1
Instructor
Thread Starter
Join Date: Feb 2008
Location: Vancouver, Canada
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
FS- Shift ****, brake handle and ignition cover
I have a practically new Rennline aluminum shift **** which includes a custom real leather boot that I had made for the ****. Plug and play as shown in photo. -SOLD
I have also a black vinyl brake handle that I was going to cut to install the matching brake handle, but decided not to go ahead with the project. -SOLD.
And finally, a brushed aluminum ignition cover. -SOLD.
Preference will be given to the first person who wants both the shift **** and brake handle, in which case, I will throw in the ignition cover for free.
Anthony
I have also a black vinyl brake handle that I was going to cut to install the matching brake handle, but decided not to go ahead with the project. -SOLD.
And finally, a brushed aluminum ignition cover. -SOLD.
Preference will be given to the first person who wants both the shift **** and brake handle, in which case, I will throw in the ignition cover for free.
Anthony
Last edited by alcanada; 03-08-2013 at 12:05 AM. Reason: SOLD
03-05-2013, 11:28 AM
#3
Drifting
Can i ask where you bought the ignition cover?
03-05-2013, 03:48 PM
#4
Instructor
Thread Starter
Join Date: Feb 2008
Location: Vancouver, Canada
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
kreeshp: The cover is new and was never installed.
Pags993: I have bought so many things for the car that I can't remember where the cover came from. Could be from ebay.
Pags993: I have bought so many things for the car that I can't remember where the cover came from. Could be from ebay.
03-05-2013, 06:21 PM
#5
Three Wheelin'
03-05-2013, 08:25 PM
#6
Drifting
Thanks!!
Trending Topics
03-06-2013, 09:36 PM
#8
Instructor
Thread Starter
Join Date: Feb 2008
Location: Vancouver, Canada
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Since there are no takers for the whole lot, I will brake up the items:
kreeshp- gets the ignition cover, please PM me your phone number to meet up.
skl2- gets the brake handle, please PM me your address, would like to get it off to you before the end of the week.
The shift **** is still available.
kreeshp- gets the ignition cover, please PM me your phone number to meet up.
skl2- gets the brake handle, please PM me your address, would like to get it off to you before the end of the week.
The shift **** is still available.
03-07-2013, 12:44 AM
#11
Instructor
Thread Starter
Join Date: Feb 2008
Location: Vancouver, Canada
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Here is a close up picture of the shift ****. To answer a question from a RL, the boot was custom made by a upholstery shop. It has the wire at the base to match the original boot.
03-07-2013, 02:50 PM
#14
Rennlist Member
for what it's worth, I checked with Suncoast about a replacement plastic ignition surround, only $10 (I nearly fell over, I figured the OEM part would be $30 or $40) but there is no availability. Apparently Porsche has none !
I ordered the black alyuminiyum one from Auto Atlanta
I ordered the black alyuminiyum one from Auto Atlanta
