6 CD CHANGER
#1
Rennlist Member
Thread Starter
Join Date: Dec 2011
Location: AlABAMA
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
6 CD CHANGER
I HAVE THE OPTIONAL HI FI SOUND SYSTEM but with a cassette and am thinking of adding the Porsche cdc-3 changer. Does anyone know what harness is required? Are all cars a plug and play meaning that the wiring for adding a cd changer is already in place? I know I need the cdc 3 unit plus the mounting bracket and cover. Any help or comments are appreciated. Thanks, MACK
Last edited by AKTUNG; 10-06-2012 at 02:47 PM.
#2
There are some great diy instructions with part #'s at p-car.com. http://p-car.com/diy/cdchanger/ Nice looking targa.
Last edited by whidbey; 02-02-2012 at 01:53 AM.
#4
Rennlist Member
aktung sweet targa btw!
i did have a cdc with my CR-210 (cassette no cd)
but it wasnt working and the mag was stuck so after
trying to remedy i just tossed the whole thing.
i will look for an MP3 aux that i can hook to the back
or to the harness to keep stock look.
perhaps you may want to go that route too.
i did have a cdc with my CR-210 (cassette no cd)
but it wasnt working and the mag was stuck so after
trying to remedy i just tossed the whole thing.
i will look for an MP3 aux that i can hook to the back
or to the harness to keep stock look.
perhaps you may want to go that route too.
#5
I have a becker 2660 (equivalent to cdc-1 according to the internet) that's attached to a 996 mounting bracket but otherwise not being used.
Looks like (borrowed image):
cables available from Porsche or Becker directly last time I checked ->http://www.beckerautosound.com/
According to the DIY site linked above, 993 bracket part number 993 645 221 00.
Make offer?
Looks like (borrowed image):
cables available from Porsche or Becker directly last time I checked ->http://www.beckerautosound.com/
According to the DIY site linked above, 993 bracket part number 993 645 221 00.
Make offer?