ryano

Im toying with the idea of doing this vs the normal RS front bits. I wonder if any RS's came from the factory like that?

Bill Verburg

yep,

ryano

Thx bill. I'm assuming from the factory this combo wasn't an option correct?

Bill Verburg

correct

Blue TTop

That front splitter is still available from local Porsche dealer (I was just there and asked). Parts guy found it with the tequipment catalog. I saw the PET diagram on his screen.

certz

In about a month my car is going to look like that, as well.

Martin S.

I run the RS CS/GT2 from splitters with a Aerokit 1B tail. It works great. But NOT for long. I am adding a RS CS insert tail....then I'll be a full on 993 RS Club Sport poseur!

Paddy

Me too. I used to run an aerokit 1B rear wing and the RS/CS front with aerokit side skirts and thought it worked great. Going full poser like Martin as we speak.

Martin S.

I had these installed a long time ago, started with 993 RS tail, then I tried a bridge wing, had a GT2 deck...now to what I really wanted all along, full poseur regalia:
GT2/993 RS CS front splitters, RS Club sport (Getty Design) tail and the obligatory RS side skirts....now I need a close ratio tranny, a Moton Club Sport suspension. In the interim, I am putting some bigger springs on my PSS9s, freshly rebuilt.

The car looks extra poseur now, with 993 RS carpet kit and a Heigo roll cage..race seats, etc.

And of course Fabspeed X pipes and FD muffs.

I'll get some pics up when the tail is installed.