The Arena against Cashmere leather is incredibly rich ... just awesome!
|
Originally Posted by JPP
(Post 9133843)
The Arena against Cashmere leather is incredibly rich ... just awesome!
|
Well done, car looks great!!
|
The cashmere leather looks stunning against the Arena backs! Beautiful job!
|
so nice!
|
Thanks for all the comments. I am now relegated to standing in the cold garage and looking at it all for the next three months.
|
ABCar, thanks for the info in this thread
|
Originally Posted by cgfen
(Post 10723580)
ABCar, thanks for the info in this thread
|
Originally Posted by ABCar
(Post 9076349)
Okay, I decided to take the plunge.
Here are a few pictures of my dis-assembly. Pretty straight forward...clips challenging but easier as I got the hang of it. Don't scratch or mar the plastic hardbacks. Start Clip removal at the bottom and work around the top to the other side using a slightliy curved pick to pull rubber clips away. Again, do not mar finish...take your time. Carful removing rubber-plastic Porsche badge...mine was fine but I noticed it could easily be damaged even if you pry it off from the back side...take your time and do not damage this difficult to replace item. Roughed up the the back side with 220 grit...washed with dawn and scrubbed off any dust, dirt or residue. Off to the paint shop (with ducktail) tommorow. thanks |
OT here, but...
Is it possible to install the upper portion of the 996 GT3 seats (with the hard backs) onto the lower portion of the standard 993 seats? |
Originally Posted by sm
(Post 11581225)
OT here, but...
Is it possible to install the upper portion of the 996 GT3 seats (with the hard backs) onto the lower portion of the standard 993 seats? |
Originally Posted by luckyJ
(Post 10791872)
hi, I was able to take the middle cushion out as they were just secured by the Velcro....but the first picture with the two bolt like fasteners near the bottom...how do I release these please?
thanks https://rennlist.com/forums/993-foru...eat-backs.html |
I have one quick question about this. How did you guys remove the porsche sign on the back? I'm deathly afraid of scratching it up.
TIA! |
Originally Posted by MartinC2S
(Post 12467116)
I have one quick question about this. How did you guys remove the porsche sign on the back? I'm deathly afraid of scratching it up.
TIA! |
I ended up carefully peeling them with the dull side of an exacto knife so as not to cut them up. Then I stored them on some sticker paper until the hardbacks come back from the shop.
|
All times are GMT -3. The time now is 11:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands