AOW162435

This is not 993-specific, but then again I think I add enough 993 drivel to this forum...

I'm looking for a short length of aluminum tube/pipe with an inside diameter of 2-1/16". I only need 12" or less for a project. The online sources I've found only sell in 10' or 20' lengths.

Wall thickness is not important, but the thinner the better.

Any thoughts?


Andreas

flyingchappy

Andreas,
Try this website. 2' lengths minimum.
http://www.metalsdepot.com/Cart3/vie...LimAcc&aident=

AOW162435

Greg,
They have a 2" I.D. tube which may work. Worst case, I can have it opened up a bit by "that" machinist.


Andreas

chris walrod

I have several material suppliers that can help, but needs to wait until Monday

dpowell

Try Smallparts.com. Select the aluminum 6061 - T6511 Round. They have a 36" piece with outside of 2.25 - inside 2.12 for $25.23

Drew

356Racing

I have some T6 pipe in the garage that is 2.065" ID. Are you going to polish it? There is some outside trama from being in my box of drops.

bart1

Dr Dre. If you don't have this sorted by Monday, shoot me a message.