Recap of the SAI circuit
#121
Addict
Rennlist Member
Rennlist Member
Hi Guys,
I amended the list that Paul M put together - it might be easier to just continue to add to this list by filling out the quantity next to your name. Some people, I couldn't find a definitive request as far as quantity of units. Please confirm the list.
Also, given that there's an option to add the enclosure or not, to make things simple would it be easier to choose: a) default is w. enclosure OR b) default is board only? Obviously, I was just thinking of trying to make Lewis' job easier in terms of tracking all the different order variants.
Finally, I would agree with NP993 - looking at the orders this is no insignificant amount of work (heck, just organizing the shipping alone is a fair amount of effort - nevermind the assembly of the kits)...it's incredibly generous of Lewis to do this and I'd have no problem adding some kind of labor on top of this.
Thanks again Lewis!
I amended the list that Paul M put together - it might be easier to just continue to add to this list by filling out the quantity next to your name. Some people, I couldn't find a definitive request as far as quantity of units. Please confirm the list.
Also, given that there's an option to add the enclosure or not, to make things simple would it be easier to choose: a) default is w. enclosure OR b) default is board only? Obviously, I was just thinking of trying to make Lewis' job easier in terms of tracking all the different order variants.
Finally, I would agree with NP993 - looking at the orders this is no insignificant amount of work (heck, just organizing the shipping alone is a fair amount of effort - nevermind the assembly of the kits)...it's incredibly generous of Lewis to do this and I'd have no problem adding some kind of labor on top of this.
Thanks again Lewis!
- vincer77
- Rick Lee
- Aircooled Dave - 1
- michaelh993
- tonypai - 1
- fullbooker - 1
- NP993 - 1
- flying low - 4
- ilko - 1
- 600RR - 1
- Shahrams - 1
- bw993 - 1
- tbil - 1
- Teddy2 - 1
- Ash - 2
- 993BillW - 1
- Jim W - 1
- Dan V - 1
- efong - 1
- AW21 - 1
- NC TRACKRAT - 1
- cabrio993 - 1
- Paul M - 1
- tropheus - 2
- C4SJOHN - 2
- MDamen - 1
- TheBen - 1
- JPS - 1
- air993 - 1
- alpinadvl - 1
- rsa964 - 1
- cdmdriver - 1
- Jeff96-993 - 1
- Kaefer - 2
- SimonM_98 - 1
- CarreraX - 2
- skypig - 1
- Don't lift - 1
- 2ndof2 - 1
- Richard W - 1 assembled and 1 kit
- Amfab - 1
- M Fig -2
- e3photo - 1
- 911Dave - 1
- kraftsman - 1
- PNogC2S - 1
- CAHRERA - 1
- slapshot - 1
- bprasmsn.com - 2
- Blue TTop - 2
- rdevany - 1 kit
- earossi - 1
#122
Rennlist Member
Join Date: Jan 2007
Location: Savannah, GA / Bern, Switzerland
Posts: 863
Received 70 Likes
on
32 Posts
Hi Guys,
I amended the list that Paul M put together - it might be easier to just continue to add to this list by filling out the quantity next to your name. Some people, I couldn't find a definitive request as far as quantity of units. Please confirm the list.
Also, given that there's an option to add the enclosure or not, to make things simple would it be easier to choose: a) default is w. enclosure OR b) default is board only? Obviously, I was just thinking of trying to make Lewis' job easier in terms of tracking all the different order variants.
Finally, I would agree with NP993 - looking at the orders this is no insignificant amount of work (heck, just organizing the shipping alone is a fair amount of effort - nevermind the assembly of the kits)...it's incredibly generous of Lewis to do this and I'd have no problem adding some kind of labor on top of this.
Thanks again Lewis!
I amended the list that Paul M put together - it might be easier to just continue to add to this list by filling out the quantity next to your name. Some people, I couldn't find a definitive request as far as quantity of units. Please confirm the list.
Also, given that there's an option to add the enclosure or not, to make things simple would it be easier to choose: a) default is w. enclosure OR b) default is board only? Obviously, I was just thinking of trying to make Lewis' job easier in terms of tracking all the different order variants.
Finally, I would agree with NP993 - looking at the orders this is no insignificant amount of work (heck, just organizing the shipping alone is a fair amount of effort - nevermind the assembly of the kits)...it's incredibly generous of Lewis to do this and I'd have no problem adding some kind of labor on top of this.
Thanks again Lewis!
- vincer77
- Rick Lee
- Aircooled Dave - 1
- michaelh993
- tonypai - 1
- fullbooker - 1
- NP993 - 1
- flying low - 4
- ilko - 1
- 600RR - 1
- Shahrams - 1
- bw993 - 1
- tbil - 1
- Teddy2 - 1
- Ash - 2
- 993BillW - 1
- Jim W - 1
- Dan V - 1
- efong - 1
- AW21 - 1
- NC TRACKRAT - 1
- cabrio993 - 1
- Paul M - 1
- tropheus - 2
- C4SJOHN - 2
- MDamen - 1
- TheBen - 1
- JPS - 1
- air993 - 1
- alpinadvl - 1
- rsa964 - 1
- cdmdriver - 1
- Jeff96-993 - 1
- Kaefer - 2
- SimonM_98 - 1
- CarreraX - 2
- skypig - 1
- Don't lift - 1
- 2ndof2 - 1
- Richard W - 1 assembled and 1 kit
- Amfab - 1
- M Fig -2
- e3photo - 1
- 911Dave - 1
- kraftsman - 1
- PNogC2S - 1
- CAHRERA - 1
- slapshot - 1
- bprasmsn.com - 2
- Blue TTop - 2
- rdevany - 1 kit
- earossi - 1
Jack
#123
Three Wheelin'
I'm not in on this so I'll comment as a third party. Lewis, you are being way too kind. From past experience I know that whenever someone tries to charge the exact cost on something like this he/she ends up at least a few dollars short. I applaud your determination to do this for free (ex-parts cost) but you should have a small margin at least to cover the inevitable shortfall. I roughed out your parts cost at about $17 so I'd suggest just charge $20 so you're fully covered on costs, even though I personally think you should charge quite a bit more and doubt any here would mind in the slightest. JMHO.
#124
I'm not in on this so I'll comment as a third party. Lewis, you are being way too kind. From past experience I know that whenever someone tries to charge the exact cost on something like this he/she ends up at least a few dollars short. I applaud your determination to do this for free (ex-parts cost) but you should have a small margin at least to cover the inevitable shortfall. I roughed out your parts cost at about $17 so I'd suggest just charge $20 so you're fully covered on costs, even though I personally think you should charge quite a bit more and doubt any here would mind in the slightest. JMHO.
#125
Race Director
I'm not in on this so I'll comment as a third party. Lewis, you are being way too kind. From past experience I know that whenever someone tries to charge the exact cost on something like this he/she ends up at least a few dollars short. I applaud your determination to do this for free (ex-parts cost) but you should have a small margin at least to cover the inevitable shortfall. I roughed out your parts cost at about $17 so I'd suggest just charge $20 so you're fully covered on costs, even though I personally think you should charge quite a bit more and doubt any here would mind in the slightest. JMHO.
I think it's been done before but just a suggestion, if LTC uses Starbucks we could get SB gift cards and do it that way rather than having him sell these for a profit.
To be clear, I think he's being overly cautious but I respect his position of concern.
Yes, I would like 1 pre-fab board, w/ enclosure & w/ term. blocks.
#126
I would also like to add... that there can also be an incidental cost if something doesn't work out, gets damaged, has to be re-shipped etc...
can i suggest you take the advice of 2ManyCars and Blue TTop, and round up the price.... $3 is not going to make or break anyone here... and I believe you and the owner of this forum have a good understanding.... you can just decide to make a "Rennlist Donation" if this does indeed become an issue.
I previously made an "at cost" item for another board.... and... if it werent for the generosity of people who gave me DOUBLE than what I asked.... I would have taken a loss at the end of the day....yet... i was still able to ship internationally to people, etc... all for a really low "advertised" price.
Thanks Paul M (and Ash) for making the list... and my standing order (which is on the list)... is for a full complete assembled box w/enclosure and terminal blocks.
ps: any chance of getting a unit out this week?
can i suggest you take the advice of 2ManyCars and Blue TTop, and round up the price.... $3 is not going to make or break anyone here... and I believe you and the owner of this forum have a good understanding.... you can just decide to make a "Rennlist Donation" if this does indeed become an issue.
I previously made an "at cost" item for another board.... and... if it werent for the generosity of people who gave me DOUBLE than what I asked.... I would have taken a loss at the end of the day....yet... i was still able to ship internationally to people, etc... all for a really low "advertised" price.
Thanks Paul M (and Ash) for making the list... and my standing order (which is on the list)... is for a full complete assembled box w/enclosure and terminal blocks.
ps: any chance of getting a unit out this week?
#127
Advanced
Join Date: Aug 2010
Location: Charleston, WV
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
I'll take one
Adding my name to the bottom - thanks Lewis
- vincer77
- Rick Lee
- Aircooled Dave - 1
- michaelh993
- tonypai - 1
- fullbooker - 1
- NP993 - 1
- flying low - 4
- ilko - 1
- 600RR - 1
- Shahrams - 1
- bw993 - 1
- tbil - 1
- Teddy2 - 1
- Ash - 2
- 993BillW - 1
- Jim W - 1
- Dan V - 1
- efong - 1
- AW21 - 1
- NC TRACKRAT - 1
- cabrio993 - 1
- Paul M - 1
- tropheus - 2
- C4SJOHN - 2
- MDamen - 1
- TheBen - 1
- JPS - 1
- air993 - 1
- alpinadvl - 1
- rsa964 - 1
- cdmdriver - 1
- Jeff96-993 - 1
- Kaefer - 2
- SimonM_98 - 1
- CarreraX - 2
- skypig - 1
- Don't lift - 1
- 2ndof2 - 1
- Richard W - 1 assembled and 1 kit
- Amfab - 1
- M Fig -2
- e3photo - 1
- 911Dave - 1
- kraftsman - 1
- PNogC2S - 1
- CAHRERA - 1
- slapshot - 1
- bprasmsn.com - 2
- Blue TTop - 2
- rdevany - 1 kit
- earossi - 1
- sdrake - 1
#128
Burning Brakes
The list is 65 strong at this point. Even if Lewis were to get $20 as 2Many and Blue suggested, that's hardly reason to be concerned. Larry would not have been concerned! If it's enough, then just make it $20!
#129
I'm also on the list for a fully assembled box with enclosure and terminal blocks plus whatever Lewis is charging,I'm sending an extra $10 because this is above and beyond the call of duty!!!
#130
Count me in for a complete unassembled kit with enclosure and terminal blocks. Thanks to Lewis for taking this project on and I will happily pay a price that makes it worth your time and effort.
#133
Addict
Rennlist Member
Rennlist Member
Definitely would want one with the enclosure. Please upgrade my order to include that
Thanks everyone for all the help with tracking orders, and thanks for ltc for doing all the real work!
Thanks everyone for all the help with tracking orders, and thanks for ltc for doing all the real work!
#135
SAI
Hello Lewis,
Please count me in for two full assemblies with enclosures and terminal blocks. Please tell me how much to send you. I'm also sending extra $$$ because this is above and beyond what is expected.
Thank you so much !
Bill
Please count me in for two full assemblies with enclosures and terminal blocks. Please tell me how much to send you. I'm also sending extra $$$ because this is above and beyond what is expected.
Thank you so much !
Bill