bart1

Looking for one from an NA 993, on the driver's front. It appears that somehow my tire got into mine and they didn't get along too well. Not sure jow it happened really, but I assume it was at the track the other day. 225 width Falken RT615s on factory Cups. Surprised it caused an issue.

I think the correct part number is:

993 504 125 00

Thanks for any leads or if you have one!

-Bart

air klwd

Bart.I just put a turbo bumper on my Cabriolet and to do it right I changed the front liners so I'm sure I have 1 of those in the shed give me a day to dig it out....if you want it just pay the shipping it's yours no charge.but they are pretty cheap new if i'm not mistaken....Harry

ninjabones

My tires rub a bit at full lock along the lower portion in front of the aux oil cooler. After replacing the fender liner twice, I found a cheaper and easier solution. Just go to pep boys and buy the flat truck mud flaps (almost same material). Cut to fit with tin-snips and secure with pop-rivets (or zip-ties). $10 fix and 10 min.

bart1

Excellent offer, Harry! Let me know if you find it. Glen, that seems like a practical idea, if a bit hairshirt

I'll have to figure out exactly what's going on. May have to add that to my list of changes before a trackday. What if I left it out when at the track? Drivers is the AC side, so no oil cooler issues.

993Brendan

I've had a couple of fender liners pop out at the track and rub against my tire shredding the liner pretty good. After doing it to a brand new one that had been installed just a few days, I decided to zip tie the remnants to the bumper and it hasn't come loose again! Good luck.

bart1

FWIW, these are $29.95 from Sunset.