944/951guy

I need a set of those Pullers that are used to pull the stock radio's from our cars.
Anyone have a set they no longer need and want to sell?

Slow Guy

As a last resort you can get them from Becker, I had them send along a set when I had the CDR-220 faceplate modified. Becker Audio I would also check ebay.

Jeff96-993

I made my own removal tools, think there was a thread here or on Robin Sun's site. A couple of pieces of flat 1/4" shim stock, with an angled edge. Ten minutes at the hardware store, ten minutes to mod, ten minutes to remove. Much better than waiting 10 days for the tools to arrive.

David Schiff

6.00 at Kragans
ds

944/951guy

Whats Kragans a website?

Canyon56

I'm assuming he means Kragens Auto Parts stores.

bart1

Probably any decent auto parts store or Wal-Mart would have the typical flat or two pin ones. Anybody have a pic of one that works with the stock radio? I may have some sitting around.

M. Schneider

Just ordered a set from Sunset Porsche, lemme see,, about $3.00. IIRC

jaholmes

I think I got mine from pelican parts. But as other have said it's pretty easy to fashion something to depress the tabs.

944/951guy

THANK YOU AGAIN RENNLIST COMMUNITY!! Just thought I would share my progress on this thread. One of the great members of this forum "Michaelc" Offered to send me a couple sets of the radio puller tools and he did and they worked great. Now I can finally get that code!!

THANKS Michaelc & Rennlist!!