Notices
993 Forum 1995-1998

Need Help with 993 assembly.

Thread Tools
 
Search this Thread
 
Old 10-15-2009, 04:39 PM
  #1  
944/951guy
Three Wheelin'
Thread Starter
 
944/951guy's Avatar
 
Join Date: Dec 2006
Location: Portland, OR
Posts: 1,610
Likes: 0
Received 0 Likes on 0 Posts
Default Need Help with 993 assembly.

I have 2 questions.
What are these nozzels in the picture?
and does anyone have a picture of the hood nozzels wiring? I just need to find out where the 2 wires from the passenger nozzel go in the plug and the 2 from the drivers nozzel.
Thanks.

Old 10-15-2009, 04:50 PM
  #2  
Carrera GT
Wordsmith
Rennlist Member
 
Carrera GT's Avatar
 
Join Date: Feb 2003
Posts: 8,623
Received 10 Likes on 9 Posts
Default

What's the part number?
Old 10-15-2009, 04:54 PM
  #3  
Crimson Nape Racing
Addict
Rennlist Member

 
Crimson Nape Racing's Avatar
 
Join Date: Feb 2004
Location: Gemantown, TN
Posts: 1,084
Likes: 0
Received 1 Like on 1 Post
Default

not sure about the wiring. I assume they are for the heated washer nozzles and should just plug in.

the things in the pic are (I think) drains mounted on the bottom of the splitters. the one on the driver's side has the overflow tube from the master cylinder plugged into it. can't remember what plugs into the one on the passenger side.
Old 10-15-2009, 04:54 PM
  #4  
jscott82
Rennlist Member
 
jscott82's Avatar
 
Join Date: Aug 2006
Location: Charlotte, NC
Posts: 3,097
Received 380 Likes on 248 Posts
Default

those are the headlight drains..... They clip into the bottom of the splitters and connect to the tube coming from the headlight connector...
Old 10-15-2009, 04:58 PM
  #5  
944/951guy
Three Wheelin'
Thread Starter
 
944/951guy's Avatar
 
Join Date: Dec 2006
Location: Portland, OR
Posts: 1,610
Likes: 0
Received 0 Likes on 0 Posts
Default

Oh the white tubes? coming from the headlights?
Old 10-15-2009, 04:58 PM
  #6  
Crimson Nape Racing
Addict
Rennlist Member

 
Crimson Nape Racing's Avatar
 
Join Date: Feb 2004
Location: Gemantown, TN
Posts: 1,084
Likes: 0
Received 1 Like on 1 Post
Default

I had the "drain" part right

BTW, they mount with the opening to the back. otherwise they would be headlight coolers....
Old 10-15-2009, 05:01 PM
  #7  
mcfeeley1071
Instructor
 
mcfeeley1071's Avatar
 
Join Date: Jul 2008
Location: Arkansas
Posts: 170
Likes: 0
Received 0 Likes on 0 Posts
Default

These are the drain ports for the oil cooler and the a/c condenser on either side of the bottom side of the front bumper. There should be two drain lines that the rounded ends fit in and then they snap up onto the bottom side with the open part facing backward.

See pic for locations to look for.
Attached Images  
Old 10-15-2009, 05:01 PM
  #8  
944/951guy
Three Wheelin'
Thread Starter
 
944/951guy's Avatar
 
Join Date: Dec 2006
Location: Portland, OR
Posts: 1,610
Likes: 0
Received 0 Likes on 0 Posts
Default

anything on the wiring?
This is what im talking about. I dont know what wire goes where on here.
Old 10-15-2009, 05:04 PM
  #9  
944/951guy
Three Wheelin'
Thread Starter
 
944/951guy's Avatar
 
Join Date: Dec 2006
Location: Portland, OR
Posts: 1,610
Likes: 0
Received 0 Likes on 0 Posts
Default

THX GUYS!! Found the drain mounts on the splitter.
Now just to figure out the wiring for the nozzels..........
Old 10-15-2009, 11:41 PM
  #10  
944/951guy
Three Wheelin'
Thread Starter
 
944/951guy's Avatar
 
Join Date: Dec 2006
Location: Portland, OR
Posts: 1,610
Likes: 0
Received 0 Likes on 0 Posts
Default

Anyone know anything about the wiring. I have searched and searched and nothing.
Old 10-16-2009, 12:57 AM
  #11  
craiger914
Advanced
 
craiger914's Avatar
 
Join Date: Dec 2006
Location: S. Orange County, CA
Posts: 80
Likes: 0
Received 0 Likes on 0 Posts
Default

Is that relay R32?

I have my 993 companion that I purchased for my 914 conversion. Give me a part/relay #
Old 10-16-2009, 01:19 AM
  #12  
944/951guy
Three Wheelin'
Thread Starter
 
944/951guy's Avatar
 
Join Date: Dec 2006
Location: Portland, OR
Posts: 1,610
Likes: 0
Received 0 Likes on 0 Posts
Default

No there is nothing in my R32 position.
A relay part number will help you figure out the wiring?
Old 10-16-2009, 01:19 AM
  #13  
944/951guy
Three Wheelin'
Thread Starter
 
944/951guy's Avatar
 
Join Date: Dec 2006
Location: Portland, OR
Posts: 1,610
Likes: 0
Received 0 Likes on 0 Posts
Default

No there is nothing in my R32 position.
A relay part number will help you figure out the wiring?
Old 10-16-2009, 01:30 AM
  #14  
craiger914
Advanced
 
craiger914's Avatar
 
Join Date: Dec 2006
Location: S. Orange County, CA
Posts: 80
Likes: 0
Received 0 Likes on 0 Posts
Default

Where is the wiring located? in the trunk? can't tell from the picture

Yes, and numbers to help me locate it in the book
Old 10-16-2009, 01:36 AM
  #15  
944/951guy
Three Wheelin'
Thread Starter
 
944/951guy's Avatar
 
Join Date: Dec 2006
Location: Portland, OR
Posts: 1,610
Likes: 0
Received 0 Likes on 0 Posts
Default

No it is under the hood. These are the 4 wires that go to the windshield washer nozzels.
2 go to the passenger nozzel and 2 to the drivers side nozzel.
The guy who painted my car pulled them out of the plug and I dont knwo where they go back in.

What relay part number do you need? What I mean is off of what relay? intermitten wipers??


Quick Reply: Need Help with 993 assembly.



All times are GMT -3. The time now is 07:39 PM.