Thaddeus

Hey,

I'm sorting out the Deer Slayer and found out why the driver's side headlamp was working intermittently. The socket that resides inside the fender, that the headlamp bucket slides up to and engages, is broken and wobbling around loose in there. It's made of some brittle blue plastic. I kind of fished the whole socket out and plugged it into the bucket before shoving that back in the fender, so I have light, but I suspect it will eventually work loose.

I'm going to get one from Porsche if possible and redo it, but a part number would be nice. I couldn't find it.

Car year and model in sig.

thanks

Thaddeus

richardew

http://dcauto.gotdns.com/catalog/ind...05&illo=905-00

It's either 20 or 21. I have one that came loose also. I just plugged it in and it's been just fine.

The Brewmeister

The PET parts manual shows: 999 650 150 40 Plug Socket, Wiring Harness. These part numbers are
also shown in the list but are not shown in the diagram: 999 652 871 22 Connector 0,5 - 1,0 and
999 652 744 20 Contact Bush 1,5 - 2,5 for Pos.21

The Brewmeister

Dang, take a break to walk the dog and get shown up again!

Thaddeus

Thanks guys!