ceboyd

These use Recaro brackets and Sliders (driver seat currently does NOT slide because it had a seat back brace -- seat back brace can be included for an additional $60 -- It's the IOPort Racing one as an FYI)

These were in my 993 for 2 years (car was used for DEs ONLY and not daily driven or winter driven)

The driver side is custom done to sit flush in front of the steering wheel instead of at an angle and obvioiusly bolts right in. The passenger side seat is 1" wider than the driver side to accomodate the larger folks who need a little more wiggle room.

I will double check tomorrow but I believe the Driver side is 15" wide and the passenger is 16" wide.


NOTE that the seat covers are sold seperately and are replaceable when they wear out. (I opted for the more expensive seat cover with the red stripe so the covers alone cost $150 each)
These are called RoadRace deluxe and are pretty hardcore race seats that hug you really well. I loved them on the track!

They are fully hans compatible.

The simpson harnesses are camlock and matching.

Package price (minus the seat back brace) is $1400 cash n carry in Chicago. I can ship at additional expense of ship cost (but keep in mind ship cost alone is probably $150 to $250 depending on where you are located)

No, I'm not interested in going down on price and I'm not interested in doing $1400 shipped either.

I highly prefer these to be local chicagoland Cash n carry.

I'll be removing them from the car this Saturday morning (my DAS BAR is getting picked up this Saturday morning so that won't be available any longer)

ceboyd

o.k. I'll post more pics out of the car later today along with confirmation of seat sizes for driver and passenger

ceboyd

a few more photos now that they are out of the car...


The driver seat is indeed 15" side and the passenger is 16" wide

avidtest

Hi Chris,

Not to take any steam away from the seats, but what steering wheel is that?

ceboyd

no worries.. it's going to be FS as well once I figure out how to put my stock one back on.. lol


It's a 996 3-spoke that I paid $355 just to get custom recovered with extra padding with alcantara and the race stripe...

ceboyd

yes, still available..

I'll reassemble with the brackets if necessary and take new pics if someone seriously wanted them and wants to see them fully assembled first for some reason (but packaging up for shipment is easier if disassembled)

gonzilla

Wow, cool seats! Free Bump!!!

IamSMC

Has it been picked up?

ceboyd

yes indeed it was... my DAS BAR is sold



Also, on these seats and belts..


I've decided to just include the IO Port Seat back brace with the seats (it's safer for the driver to have it IMHO)

..but I also want to make it clear that I only used the belts for DE and never for a club race. The belts are expired (so they would not pass a tech for club race)

If you are in a region where they check belt expiration, you won't want my belts. I never had any issues with DEs and my belts FWIW. ....and never had an issue with them not working either...

ceboyd

bump back up

ceboyd

o.k.

REVISED INFO:

HARNESSES and Brey Krauss side mounts NOT INCLUDED!!!


$1200 + actual ship cost for the 2 seats, 2 seat covers, IO Port Back brace, 2 Recaro brackets and sliders

ceboyd

...and still available :-)

I am also going to include the necessary longer bolt to attach the stock seat belt recepticle (both for driver and passenger side so 2 bolts obviously)

ceboyd

still available :-)

ceboyd

seats w/brackets and sliders and IO port seat back brace still FS

ceboyd

seats still available