Programming a new remote
Thread Starter
Pro
Joined: Oct 2006
Posts: 717
Likes: 0
From: Belgium
Programming a new remote
I have a '95 MY 993, and got a new remote the other day.
I've gotten the instructions out of the WS manual. It's one of these 'contact off/on, wait 32.5 minutes' and so on affairs.
The last instruction baffles me somewhat. It say something like 'insert key, move contact to pos. 1, and remove key'.
I tried it the first time yesterday, but obviously got it wrong.
Can you remove the key with the contact in pos 1 ?
Any other tips/pointers to achieve this re-synchronising ?
Thx,
Peter R.
I've gotten the instructions out of the WS manual. It's one of these 'contact off/on, wait 32.5 minutes' and so on affairs.
The last instruction baffles me somewhat. It say something like 'insert key, move contact to pos. 1, and remove key'.
I tried it the first time yesterday, but obviously got it wrong.
Can you remove the key with the contact in pos 1 ?
Any other tips/pointers to achieve this re-synchronising ?
Thx,
Peter R.
