NB rear offset of 18" Kinesis Supercups?
#1
Race Director
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Those of you who have 18x10 Kinesis Supercups on your NB: What is your rear offset? I'm looking at a set w/ 55 mm offset in the rear, which I'm afraid will poke out too much in the back, especially at ROW M030 ride height. Any experience here? Thanks.
#2
Addict
Rennlist Lifetime Member
Rennlist Lifetime Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I may be wrong but I think they're a 65mm offset in the rear. I'm not certain that you'll clear if you run 285s in the rear so measure carefully.
Cheers,
Rick
Cheers,
Rick
#4
Race Director
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by kary993
I believe that a 55mm offset like that of the standard 17" x 9" rear wheel, would not work for you with a 10 inch wheel.
That's just what I was afraid of. I know the stock 18x10 NB offset is 65, but didn't know if there was something special about the K-Supercups that made 55mm ok in the back. Thanks.