I am in the market for new wheels following my suspension addition. I almost pulled the trigger on the wrong size wheels yesterday and feel really bad for the seller. So I spent alot time researching last night reading threads. I pulled the wheels off and noticed there are no spacers on the front and 30mm spacers on the rear!

Heres the million dollar question! What is the optimum wheel size I should be fitting my 98C2S with if I leave the rear spacers in or (suppose) to remove? So many threads on this , please help, still confused.

I also tried to search for an identification of my wheels that came with my 98S. Can someone help me identify these wheels. Made in Italy, 17inch (Turbo Twist look) solid spoke wheels (ribs in spokes) have the following numbers cast on the back side: (f) 993.362.124.00 (b)993.362.128.00
Any thoughts here?

 

I cannot offer suggestions for your WB car. However, if the car was mine, I would ditch spacers in a hurry. IMO, they are unsafe unless specifically installed by Porsche with TüV approval.

Certain someone will offer a wheel size for your C2S. Good luck.

 

I cannot offer suggestions for your WB car. However, if the car was mine, I would ditch spacers in a hurry. IMO, they are unsafe unless specifically installed by Porsche with TüV approval.

Someone will offer a wheel size for your C2S. Good luck.