I just got my RUF Spoiler COntrol Module in the mail today! WHERE is the factory one so I can install this! Sorry for the Noob question, but I cant find it! Also is there anyway to get the wheel centercaps off without taking the whole wheel off the car? i got some RUF centercaps and dont want to take all 4 wheels off just to swap them.....thanks guys! Sorry for hte lazy questions!
ADAM

 

check out the last picture in this DIY.

http://p-car.com/diy/tail/tailwarninglights.htm

 

Thanks! Any inight on the centercaps?
ADAM

 

There should be some holes in the centercaps. Stick something in there and pull, they will come right out.

 

Plastic or aluminum centers? Alum. have to have that little tool that goes through holes. Plastics may just come out with a little pry with a tiny screw driver.
Can't help you with the module, but I do know (now) that if you push up on the wing button before you get up to speed, it stays up instead of up and down with speed.....suppose thats no help now that you bought the module.

 

I know that you cna manual override the spoiler...but I want the RUF module because when I get my RUF mufflers they work off of the RUF moudule....and hte exhaust valve opens when the spoiler goes up at 70 MPH...it is a cool setups! The moudle and centercaps are both successfully installed now! Thanks for everyones help! I have some parts that I am willing to part with now! Some 4S plastic centercaps, and some black front floormats.....dont want much for these peices....just enough to cover shipping and have something left over to buy a sandwich!

ADAM

 

Well by override do you mean keeping it from going up and down? If you manually put the wing up, it comes back down right? Buy if you just bump the swith, it stays up with or with out speed.

You have PM too.

 

you have a PM.