OK, just finished another 10 pairs of these brackets, we will call these rev. Mk2 as I have added one-dimple-di'd hole instead of two holes and made from 6061. As you can tell, I found some dimple-dies at work while scrounging around. I am in no way trying to force NASCAR technology (oxymoron) into our 993's These should be c/f, but ally is quicker for me right now.

I have to appologize as I didnt have time to surface finish or bead blast these ones. My original intent was to sneak these in a batch of annodizining going out at work, but the batch of other parts to be annodized is still a few weeks from leaving.

Trouble is, I have just over 15 requests, on top of the original four pairs I sent out. (Kelly, your pair is on its way in a day or so, I promise)
Following, in order of request by this thread or PM:
Monkey Boy
Dudley
Mingson
Freier
Ammo_Collector
Chrisper 993
West Coast 996
Ash
Cowtown
Chuck W
Mr Sullivan
Brett - 1996 C4
Michael_Philippi
Trevor Townsend
Low Blow

I truly wish to occomodate all who have requested, but I have -ten- finished for this second run. Is there anyone who can wait for the next batch that I will eventually make? For those who really could use a pair, now, please add to this thread with your request and PM me with your shipping address.
Material cost for each pair (I had to purchase a 4'x8' sheet of 6061 this time) is ~$3.50 in addition to $5 shipping. Just wish to cover my costs, not selling anything here. Let me know and these will ship next Monday at the latest..

 

Chris:

I'm not in a huge hurry, so I'm happy to wait for the next batch. Thanks again for what looks like a great effort!

Brett

 

Chris, you rock, boy!!! You embody the spirit that is Rennlist!

Whatever I can ever do to help you, please never hesitate to ask...

 

Chris,

I sent you a PM.
I can't say this enough...thanks for your time and generosity in this!

 

Chris, I am in no hurry at all but would be interested in a set. If you decide to ask a little something for the effort, I won't mind. Perhaps a coffee or another favorite beverage if we ever meet up in Malibu or elsewhere.

 

Chris...Just PM'ed you. And I repeat myself...class act!

 

I also just PM'd you. Thanks for the generosity!

 

I too am in no hurry and don't even have time for the project at this point so please give mine to the next in line. Thanks again.

 

Chris,
I am going to be buying the HID's from the ebay store listed earlier, so I guess I would need these mounts pretty soon. I just need to figure out what type of kit I should order from him.
http://cgi.ebay.com/ebaymotors/ws/e...7&rd=1&tc=photo

Thanks!
--Andy (WannaB_turbo)

 

Andy

Here's a current link. You want these with the H1 bulbs.

http://cgi.ebay.com/ws/eBayISAPI.dll...=WDVW&tc=photo

 

Chris, I sent you PM...will drop check in mail tomorrow for mine... thanks again.