RS sideskirts/rockers group buy!
#17
Those are the aerokit side skirts, which you can get from Gert for $645 plus shipping. They require prep and paint, of course, which will run maybe $300? And those are aerokit (or possibly Techart, which look the same) front splitters. Overall that's a good street look, IMHO, but I'm shying away from those skirts since I'm installing RS front splitters (and it's nice to be consistent) plus RS skirts don't need paint and thus won't get chipped up at the track.
#20
Originally Posted by 2ndof2
Is that picture of the black one with side-skirts backwards? Look at the windshield wipers sitting parked to the passenger's side...
if it were, that would make for a pretty weird lic plate #.
#21
Some people like to reverse the windsheild wiper park position to get better visibility.
I did it on an SC I used to have.
I wouldn't do it again. If there is slush or snow it piles it up in front of your line of site instead of piling it on the passenger side.
I did it on an SC I used to have.
I wouldn't do it again. If there is slush or snow it piles it up in front of your line of site instead of piling it on the passenger side.
#23
Originally Posted by 2ndof2
Is that picture of the black one with side-skirts backwards? Look at the windshield wipers sitting parked to the passenger's side...
#24
Originally Posted by David in LA
It's a euro-spec car so wipers rest on the right hand side.
It's a RHD car, so as you point out, those wipers are sitting on the drivers side.
#25
The place to call is www.v-zweeden.com, for those RS skirts,they have originals and fiberglass copies,cheers,Sonny.
#26
Guys - Sorry I've been out of touch... in vacation in Hawaii. According to Gert, shipping to SoCal will be around $100 or so. Maybe its better to go with Sunset Porsche for $880 and pay $20 shipping?
#27
www.v-zweeden.com offers the fibreglass versions for 350 Euro ($455). I do not know if that comes with the mounting hardware or not though.
#29
Originally Posted by Cy
But I'm sure the fiberglass versions would require paint and prep which I would bet could be $200 to $400 + the hassle of getting it done. The originals are bolt on and go.
Regards,
Regards,