Bilstein Shock to Pair with H&R Spring
#1
Rennlist Member
Thread Starter
Bilstein Shock to Pair with H&R Spring
So one of the front shocks to my PSS10s is leaking on my 97 C2S and I am planning on rebuilding all 4 through RE Suspension in NC. This will take 6 to 8 weeks and I rather not be down for the season so.. I have a new set of H&R springs(29953) that I would like to pair up with some Bilstein HDs. I found a set of Bilstein B6s online from a shop in Europe. I know there are plenty of threads out there on this combo but I cannot find one that has the updated part numbers to the B6 shocks. Can someone verify if these are the correct ones?
Also my understanding is these shocks have some height adjustability. My understanding is they have some adjustment just not sure how much. I realize H&R + HD combo is lower than ROW. Thank you for you help in advance.
https://www.design911shop.com/p/bils...e-porsche-993/
Also my understanding is these shocks have some height adjustability. My understanding is they have some adjustment just not sure how much. I realize H&R + HD combo is lower than ROW. Thank you for you help in advance.
https://www.design911shop.com/p/bils...e-porsche-993/
#2
Rennlist Member
Gert at Carnewal can set you up. B6XT(extra threads) if you’re interested in maximum ride height adjustability. Carnewal has quite a few 993 options, and Gert is supremely knowledgeable about the 993 platform.
The following 2 users liked this post by Magdaddy:
Astro_Train (05-20-2024),
M. Schneider (05-28-2024)
The following users liked this post:
Astro_Train (05-20-2024)
#4
Rennlist Member
Thread Starter