When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
From: Holden Beach and Winston-Salem, North Carolina 82 928 Euro S 5spd MOSS GREEN/CHAMPAGNE-04 996 C4S CONV TIP POLAR SILVER/METROPOL BLUE
Originally Posted by mconnolly911
i also took the simplistic approach. I use the Lamicall vent mount phone holder which I purchased on Amazon for roughly $10. I actually have a couple of them and use them in the 993, as well as my Boxster and Audi. Works fine
That's exactly what I was thinking. Has it ever fell off while driving? I have a leather cover on my phone so not sure how secure it would be.
Originally Posted by akrca4
I use Scoche short neck windshield mount with MagSafe charger. Works well and I don't have to look down for Map and Music streaming.
Andy
That's exactly what I was thinking. Has it ever fell off while driving? I have a leather cover on my phone so not sure how secure it would be.
-----------------------------------
'98 Porsche C4S - Alpine 7618, A/D/S 336is Speakers, Aluminum, Motorsound Pkgs, Litronic, Fister 3 Exhaust, Short Shifter, Golden Rod, Trans Mount, PSS10 Coilover, Walrod Bushing, Wevo Engine Mount, Tramont Cup 2 wheels.
'01 Casablanca S4 - H&R Coilover, UUC Short Shifter, UUC VM3 Exhaust, Greddy Turbo Timer, Alpine IVA-C800, DVA-5205 DVD Sound System, 19" HRE 545
'96 Casablanca A4 2.8 - Alpine 7618 HU, A/D/S PQ-8 amp, Remus Exhaust
I have magsafe case for my iphone and it held in place pretty well, but not sure about your leather case. I also adjust the windshield mount neck and let the phone kind of just sit on the dash so that helps too.
From: Holden Beach and Winston-Salem, North Carolina 82 928 Euro S 5spd MOSS GREEN/CHAMPAGNE-04 996 C4S CONV TIP POLAR SILVER/METROPOL BLUE
Originally Posted by gbgastowers
Just ordered this. Hope it doesn’t tear up my vent
This vent thing was no good for me. Tight to get on there and when I did and put the phone in it just flopped down with the rotation of the vent. The screen was then angled down and flimsy on that precious vent fin. Sending it back
Last edited by gbgastowers; 03-23-2024 at 09:53 AM.
This vent thing was no good for me. Tight to get on there and when I did and put the phone in it just flopped down with the rotation of the vent. The screen was then angled down and flimsy on that precious vent fin. Sending it back
Sorry to hear that. Works ok for my purposes . . . Best of luck finding a solution that works well for you
I ordered the Rennline mount as shown in their product page, but got the mount with a new design (similar to the chargeable mounts) ...
Experience are not so good... phone falls of easily, when not exactly mounted, and anyway ones in a while when going over our here omnipresent speed humps
the old design is much better ...
Home Depot 2.5" high angle bracket...cut shaped and modified. Mount is a Salex MagSafe. I don't have it charging the phone as I do not care for the heat MagSafe chargers create on the phone. I do have a USB-C cable to plug into the phone for charging purposes...hidden and usable behind mount.
True but there is nearly zero heat when the energy transfer is more direct (USB-C). Ergo, my preference versus a MagSafe charging system.
Not to beat this dead horse any more but iPhones have a built in heat protection process. The phone will shut itself off if it gets too hot. You probably run more risk of leaving it in the sun. These are disposable devices with planned obsolescence. MagSafe is the smallest concern.
03-20-2024 | 05:03 PM
