New Motimoto 993 offering: XB LED Headlights & Tail Lights
#77
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
We are offering the same promotion, support a Rennlist vendor!
https://merakiautoworks.com/products...led-headlights
-Josh
https://merakiautoworks.com/products...led-headlights
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
BC Forged / Soul Performance / Akrapovic / Bilstein / HRE / AL13 / CSF + more
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
BC Forged / Soul Performance / Akrapovic / Bilstein / HRE / AL13 / CSF + more
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
#78
Rennlist Member
The following users liked this post:
apkarian100 (06-19-2024)
The following users liked this post:
apkarian100 (06-19-2024)
#82
Rennlist Member
btw. Morimoto installation video for the headlights is missing very important parts and shows (like the pdf manual) some stupid stuff.
My friends here went nuts coz of it.
1. very important - you have to disconnect the main harness socket from its frame and connect manually to the light
2. dont just put the cable from the top into the fuse box, you will squeez / cut the cable when you put the cover on
Better to install cable from below (right upper corner of the box), problem is than the left cable is to short for 'proper' installation. But you can easily make an extension.
3. when you bridge the balast, make sure you place the cable in the right slot, otherwise your car might go up in flames ...
On ROW cars, there is on the left side no opening to the fender, you have to use the 'adjustment' cover to get the daylight cable into position
My friends here went nuts coz of it.
1. very important - you have to disconnect the main harness socket from its frame and connect manually to the light
2. dont just put the cable from the top into the fuse box, you will squeez / cut the cable when you put the cover on
Better to install cable from below (right upper corner of the box), problem is than the left cable is to short for 'proper' installation. But you can easily make an extension.
3. when you bridge the balast, make sure you place the cable in the right slot, otherwise your car might go up in flames ...
On ROW cars, there is on the left side no opening to the fender, you have to use the 'adjustment' cover to get the daylight cable into position
The following users liked this post:
apkarian100 (06-19-2024)
#83
pot kettle black
I can understand sending your car to a high end tuner/builder (Guntherwerks) and getting a car back with certain stylistic choices. But copying just one distinctive feature (and a pretty ugly one at that) is just beyond my understanding. This is like buying an H and sticking it on random handbag. Its still not a birkin...and looks ****.