MJBird993

My clutch is approaching the end of it's useful life, and I couldn't find anything on Robin's DIY page about how to change it. I've never changed a clutch myself, and I'm not sure that a 993 is the best car to learn on. <img src="graemlins/roflmao.gif" border="0" alt="[hiha]" />

So, it may be time for a visit to the dealer. Before I go, I would love to hear what you guys and gals have paid for a clutch replacement, and any comments or suggestions related to that.

This is on a C2 non-turbo coupe.

Thanks!

Michael

Randall G.

<a href="http://forums.rennlist.com/forums/ultimatebb.php?ubb=get_topic&f=3&t=003306" target="_blank">Recent Thread on Clutch Replacement Cost</a>

Randall G.

And, <a href="http://forums.rennlist.com/cgi-bin/rennforums/ultimatebb.cgi?ubb=get_topic&f=3&t=001191&p=" target="_blank">another good thread</a> .

jacksonking

$1,900 parts and labor done by and independent.

<img src="graemlins/r.gif" border="0" alt="[king]" />

Martin S.

What a perfect time to go to the 993RS CS (Club Sport) clutch and lightened flywheel. ANDIAL, Santa Ana, CA sells a "semi-lightened" flywheel and RS clutch. It is about $1,800 in parts. They drop the tranny out without removing the engine.

Gert Carnewal at <a href="http://www.carnewal.com" target="_blank">http://www.carnewal.com</a> sells the clutch kit...as does mike Schatz at Schatz Motorsport in Thousand Oaks, CA.

Please note that Gert is a Rennlist sponsor.

I have the ANDIAL Light Weight flywheel and RS clutch. I replaced my dual mass flywheel (It was failing). Viken also experienced this problem. I love the results...a little quicker spin up, and absolutely 0 stalling problems.

Good luck with the project.