Finished the C2 suspension refresh
#1
Burning Brakes
Thread Starter
Finished the C2 suspension refresh
Finally got the suspension updates done on my '96 C2. Been saving up parts for a while now, so it's great to finally get all these things done to the car:
-BBi RS uprights
-Full monoball suspension bushings
-Tarret/Rennline arms
-Solid subframe mounts
-KW V3 coilovers
-Rennline top mounts, camber plates, bushings, etc.
-SS brake lines
-Painted calipers to match the car
-Rebuilt the steering rack
-RS sways & end links
-SS clutch bleed line run into the engine bay
-RS heater bypass tube
-Removed rear window wiper properly (new glass, removed all wiper bits, recovered parcel shelf)
-New tires
-Alignment & corner balance
-Some PDR ding removal
Many thanks to the folks at BBi Autosport for their professional services in getting the car dialed in. Car feels good, went from crappy handling with lots of bump steer to crisp handling with excellent turn-in response. Here are some pics:
-BBi RS uprights
-Full monoball suspension bushings
-Tarret/Rennline arms
-Solid subframe mounts
-KW V3 coilovers
-Rennline top mounts, camber plates, bushings, etc.
-SS brake lines
-Painted calipers to match the car
-Rebuilt the steering rack
-RS sways & end links
-SS clutch bleed line run into the engine bay
-RS heater bypass tube
-Removed rear window wiper properly (new glass, removed all wiper bits, recovered parcel shelf)
-New tires
-Alignment & corner balance
-Some PDR ding removal
Many thanks to the folks at BBi Autosport for their professional services in getting the car dialed in. Car feels good, went from crappy handling with lots of bump steer to crisp handling with excellent turn-in response. Here are some pics:
#2
Burning Brakes
Wow, great job!
#5
Burning Brakes
Thread Starter
Sorry, don't have any before/after PDR pics. It was just something I thought could be done while the local PDR guy was visiting the shop. I had a ding on the engine lid between the "Carrera" script and the edge of the lid. It's gone now.
#7
Sweet. How does she feel. I bet much improved and nice and tight.
Trending Topics
#9
Rennlist Member
Man that must be an unbelievable "night and day" difference. Enjoy the new ride!
#10
Burning Brakes
Thread Starter
Oh yeah, compared to before it's night and day. I've been too busy to be able to take it out for a full day's drive yet, so I don't have much to report on it yet other than turn in response is super crisp, bump steer is gone (previous owner had lowered it RS -10 without correcting for anything), and the handling is much tighter than before.
I'll put up a better "review" after I've been able to drive it for a bit up in the nearby mountains.
I'll put up a better "review" after I've been able to drive it for a bit up in the nearby mountains.
#11
Rennlist Member
Very nice - enjoy!
#13
#14
Intermediate
Join Date: Dec 2009
Location: Lancashire, England
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
What balljoints have you used on your front wishbones?, are they specifically for the uprights or could they be used with standard uprights?.
Also does your ride height merit the use of RS uprights?, it doesn't look super low to me?.
Cheers
Trev
Also does your ride height merit the use of RS uprights?, it doesn't look super low to me?.
Cheers
Trev
#15
Burning Brakes
Thread Starter
The RS uprights, ball joints, and inner/outer tie rods are all from BBI Autosport. The car is at RS height at the front & RS+10 at the rear