Anyone running a wide set up - 9s and 12s?
Looking for fitment possibilities or issues with 9” up front and/or 12” in the back. I have offsets i’m thinking about, but i’m curious if anyone has had trouble or success at those widths on a 993 WB. thanks! |
On a stock C4S, the widest that I have run in the front is 18x9 ET52 and 245/35-18 tires no issues. The widest in the rear that I have run is 11" with an ET of 45 and a 295/30-18 tire with no issues. Are you planning on running 305 tires in the rear with a 12" wheel?
|
2 Attachment(s)
This is my C4S with 8.5 x 18 ET46 front and 11 x 18 ET40 rear. I'm not sure if you can go any wider than that without rubbing or rolling the fender.
Andy |
Originally Posted by akrca4
(Post 15627054)
This is my C4S with 8.5 x 18 ET46 front and 11 x 18 ET40 rear. I'm not sure if you can go any wider than that without rubbing or rolling the fender.
Andy |
Originally Posted by Gbos1
now my mechanic says don’t mess with the OEM set up on the C4S due to the AWD system. What size tires F and R are you running? |
Originally Posted by Gbos1
(Post 15627912)
now my mechanic says don’t mess with the OEM set up on the C4S due to the AWD system. What size tires F and R are you running? just keep tyre OD within 3% front / back. or remove the fastener that connects the front drive tube to the transmission. (that's the cheapest / easiest way to convert to RWD, though certainly not the best. Have fun. |
Originally Posted by akrca4
(Post 15627054)
This is my C4S with 8.5 x 18 ET46 front and 11 x 18 ET40 rear. I'm not sure if you can go any wider than that without rubbing or rolling the fender.
Andy thanks. |
Originally Posted by cgfen
Feel free to "mess away"
just keep tyre OD within 3% front / back. |
2 Attachment(s)
Originally Posted by rsabeebe
with et40 in the rear, are you running a spacer or is that a direct fit?
thanks. Andy |
All times are GMT -3. The time now is 01:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands