Flare Install Questions
#1
Racer
Thread Starter
Flare Install Questions
interested in adding club sport flares on my NB but i haven’t seen much on the installation process.
does it require cutting the fenders?
diy job?
thanks
does it require cutting the fenders?
diy job?
thanks
#2
Burning Brakes
I am also considering this so have been looking at them in detail. My conclusion is that yes they have to be cut. For the reason that the purpose of them is to push the wheels out- so without cutting them your tire will rub on the fender edge.
Just my own musings in it and happy to be corrected.
Just my own musings in it and happy to be corrected.
#3
Racer
Thread Starter
I am also considering this so have been looking at them in detail. My conclusion is that yes they have to be cut. For the reason that the purpose of them is to push the wheels out- so without cutting them your tire will rub on the fender edge.
Just my own musings in it and happy to be corrected.
Just my own musings in it and happy to be corrected.
Thanks, have you found any guide on how to do it?
#4
RL Community Team
Rennlist Member
Rennlist Member
Look up "RWB 993" on Youtube and you will see how a professional cuts fenders.
Andy
Andy
#5
there was a 993 thread a year or more ago with video of cutting the fenders.
lots of info in the 944 forum, some in 964 and 993 turbo forum.
use an outside search engine for variations of 'gt2 fender flares at rennlist.com'
here's an example
https://rennlist.com/forums/911-foru...our-911-a.html
check fvd for a full kit of flares and attachments
lots of info in the 944 forum, some in 964 and 993 turbo forum.
use an outside search engine for variations of 'gt2 fender flares at rennlist.com'
here's an example
https://rennlist.com/forums/911-foru...our-911-a.html
check fvd for a full kit of flares and attachments