GT2 Evo Bumper on Narrow Body?
#1
Rennlist Member
Thread Starter
GT2 Evo Bumper on Narrow Body?
Hi,
Would the GT2 Evo front bumper fit a narrow body 993? I know the car has the fender flares but I believe most other front bumper covers are comparable between wide and narrow bodied cars.
Would the GT2 Evo front bumper fit a narrow body 993? I know the car has the fender flares but I believe most other front bumper covers are comparable between wide and narrow bodied cars.
#3
Rennlist Member
It may fit since these parts are adjustable ...now would it look right ? That would be up to personal impressions haha best way I can phrase it , Bert
#5
the front is the same for regular and wide body.
without the flares or wider fenders the evo bumper cover would stick out 2 inches past the fenders on each side.
just imagine the picture you posted with the fender flares.
without the flares or wider fenders the evo bumper cover would stick out 2 inches past the fenders on each side.
just imagine the picture you posted with the fender flares.
#6
Rennlist Member
I have the narrow body C2 front bumper with GT2 flares it bolts right up , so in converse the GT2 EVO front bumper should mount to C2 front fenders ...YMMV, Bert
#7
Race Car
The EVO Bumpers that are available are generally fiberglass, so there is alot less flex in them that the OEM plastic bumper covers, that will streach easily to the GT2/RSR Fender flares on the front of these cars.
That being said, I have an EVO 1 bumper on my NB Car, the difference being that the EVO 1 is an extension at the bottom, leaving the stock bumper at the top. Still some flexing required in the fiberglass riser part.
That being said, I have an EVO 1 bumper on my NB Car, the difference being that the EVO 1 is an extension at the bottom, leaving the stock bumper at the top. Still some flexing required in the fiberglass riser part.
Trending Topics
#8
Rennlist Member
Thread Starter
The EVO Bumpers that are available are generally fiberglass, so there is alot less flex in them that the OEM plastic bumper covers, that will streach easily to the GT2/RSR Fender flares on the front of these cars.
That being said, I have an EVO 1 bumper on my NB Car, the difference being that the EVO 1 is an extension at the bottom, leaving the stock bumper at the top. Still some flexing required in the fiberglass riser part.
That being said, I have an EVO 1 bumper on my NB Car, the difference being that the EVO 1 is an extension at the bottom, leaving the stock bumper at the top. Still some flexing required in the fiberglass riser part.
#9
Race Car
Unfortunately, I am unsure of the original source as I bought it from a rennlister.
However if you go to the Getty site, they have them in 2 different formats, called:993 Evo Spoilers A, B
http://www.gettydesign.com/993tailba...-splitters-a-b
However if you go to the Getty site, they have them in 2 different formats, called:993 Evo Spoilers A, B
http://www.gettydesign.com/993tailba...-splitters-a-b
#10
Rennlist Member
Thread Starter
Unfortunately, I am unsure of the original source as I bought it from a rennlister.
However if you go to the Getty site, they have them in 2 different formats, called:993 Evo Spoilers A, B
http://www.gettydesign.com/993tailba...-splitters-a-b
However if you go to the Getty site, they have them in 2 different formats, called:993 Evo Spoilers A, B
http://www.gettydesign.com/993tailba...-splitters-a-b